NEW QUESTION 1
Whichtype of API is used to configure settings on the Cisco Meeting Server?

• A. XML-RPC
• B. SOAP
• C. REST
• D. XMP-RPC

Answer: C

NEW QUESTION 2
What are three reasons that switches supersede bridges? (Choose three.)

• A. Smaller frame buffers decrease latency.
• B. Forward, filter, or flood frames.
• C. Multiple simultaneous communications between ports.
• D. Larger inspection engine allows for higher throughput.
• E. Switches have many ports.

Answer: BCE

Explanation: http://docwiki.cisco.com/wiki/Bridging_and_Switching_Basics

NEW QUESTION 3
Which protocol data unit is associated with the link layer of the TCP/IP model?

• A. frame
• B. packet
• C. segment
• D. datagram

Answer: A

NEW QUESTION 4
Drag and drop each port description on the left to the port type on the right required to support it.

Answer:

Explanation:
Fiber Channel: Fiber channel port Storage port
All others will go to the Ethernet.

NEW QUESTION 5
Which two layers of the OSI model relate to the transmission of bits over the wire and packet forwarding based on destination IP address? (Choose two.)

• A. 1
• B. 2
• C. 3
• D. 4
• E. 5

Answer: AC

Explanation: Bits - 1 layer Packets - 3 layer
http://en.wikipedia.org/wiki/OSI_model

NEW QUESTION 6
Which two protocols operate at the data link layer of the OSI reference model? (Choose two.)

• A. STP
• B. NetBIOS
• C. OSPF
• D. ICMP
• E. LLDP

Answer: AE

NEW QUESTION 7
An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.
Which two items can be configured during this setup process?

• A. default port-channel mode
• B. default port VSAN membership
• C. default switch port interface state
• D. default zone mode
• E. default storage VDC

Answer: CD

NEW QUESTION 8
A network engineer needs to configure an SVI on a Cisco Nexus Series switch After configuring VLAN 10, which set of commands must the engineer enter, to complete the SVI configuration?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 9
Which description of a vFC interface is true?

• A. It can be associated to more than one VSAN
• B. It must be bound to an FCoE-enabled Ethernet or EtherChannel interface.
• C. It can be associated to a private VLAN
• D. It can be associated to an FCoE VLAN

Answer: B

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/513_n1_1/b_Cisco_n5k_fcoe_co

NEW QUESTION 10
What action does a switch take if the destination MAC address is unknown?

• A. Discard frame
• B. Send ICMP unreachable message to source
• C. Flood packet on all ports
• D. Compare destination IP address against an ACL to determine if it is permitted
• E. Send gratuitous ARP on all ports and wait for reply before forwarding

Answer: C

Explanation: "What happens though when the switch receives a frame with a destination MAC address that is not included in the table? In that case the switch will just broadcast/flood the frame with the unknown destination address to all of its ports (apart from the port where the frame came from). This process is called unknown unicast flooding. "
http://telconotes.wordpress.com/2013/03/09/how-a-switch-works/

NEW QUESTION 11
Which Cisco videophones can be registered to Spark?

• A. 8845
• B. 8945
• C. 9971
• D. 7961

Answer: A

NEW QUESTION 12
Which call solution supports messaging, meeting and calling?

• A. Expressway
• B. UCM
• C. Spark
• D. HCS

Answer: C

NEW QUESTION 13
For which reason would you implement a VSAN?

• A. to overcome the limitations of zoning
• B. to virtualize storage
• C. to segment the physical fabric into multiple logical fabrics
• D. to overcome the limitations of LUN masking

Answer: C

NEW QUESTION 14
Which is an endpoint supported by Cisco Unified Communications Manager?

• A. Legacy H 323 endpoints
• B. CMAClients
• C. immersive Telepresence endpoints
• D. Jabber Video

Answer: C

NEW QUESTION 15
Drag and drop the Cisco NX-OS user role on the left to the correct default privilege on the right.

Answer:

Explanation: network-admin—Complete read-and-write access to the entire Cisco NX-OS device (only available in the default VDC)
network-operator—Complete read access to the entire Cisco NX-OS device (only available in the default VDC)
vdc-admin—Read-and-write access limited to a VDC
vdc-operator—Read access limited to a VDC
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/security/configuration/guide/b_Cisco_

NEW QUESTION 16
Which conferencing solution is designed for scalable meetings, training and events?

• A. Spark
• B. Telepresence Server
• C. Cisco Meeting Server
• D. Cisco WebEx

Answer: D

NEW QUESTION 17
Which two types of interface exist on Cisco Nexus Fabric Extender? (Choose two)

• A. network interface (NIF)
• B. uplink interface (UF)
• C. host interface (HIF)
• D. edge interface (EIF)
• E. trunk interface (TIF)

Answer: AC

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/interfaces/602_n1_1/N5K_

NEW QUESTION 18
Which protocol is used to encapsulate Fibre Channel frames, enabling them to be transmitted over Ethernet networks?

• A. FCoE
• B. DCB
• C. SCSI
• D. Ethernet SAN

Answer: A