we provide Pinpoint Network-Appliance NS0-184 test preparation which are the best for clearing NS0-184 test, and to get certified by Network-Appliance NetApp Certified Storage Installation Engineer - ONTAP. The NS0-184 Questions & Answers covers all the knowledge points of the real NS0-184 exam. Crack your Network-Appliance NS0-184 Exam with latest dumps, guaranteed!
Free NS0-184 Demo Online For Network-Appliance Certifitcation:
NEW QUESTION 1
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. ONTAP System Manager
- B. Active IQ Unified Manager
- C. Active IQ OneCollect
- D. Interoperability Matrix Tool
Answer: A
Explanation:
Reference: https://docs.netapp.com/us-en/ontapsystems/pdfs/sidebar/AFF_A700_and_FAS9000_Install_and_Setup.pdf
NEW QUESTION 2
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to
the cluster interconnect switches.
- A. 4
- B. 2
- C. 3
- D. 1
Answer: B
NEW QUESTION 3
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?
- A. Addtheshelftothe existingstack.
- B. Create a newstackon the HA pairto add the shelf.
- C. Connectthe shelfto anHA pair withNSE drives.
- D. LicenseNSE and add the shelfto thisHA pair as a new stack.
Answer: A
NEW QUESTION 4
You want to add an AFF A400HA pair to an existing cluster. In this scenario,which LIF type is required?
- A. cluster-mgmt
- B. intercluster
- C. data
- D. node-mgmt
Answer: B
Explanation:
Reference: https://docs.netapp.com/us-en/ontapmetrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf
NEW QUESTION 5
During an installation of an AFF A400 cluster, you need to configure secure multitenancy. What will enable you to accomplish this task?
- A. failover groups
- B. VLANs
- C. broadcast domains
- D. IPspaces
Answer: D
NEW QUESTION 6
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp. You use the
autosupport history show command and see the output shown in the exhibit. The customer confirms that the AutoSupport settings are correct. 
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to enable AutoSupport for both nodes.
- B. The customer needs to exclude the two nodes from the attachment-size limitation.
- C. The customer needs to change the transport protocol to HTTP.
- D. The customer needs to white-list the two nodes on their mail server.
Answer: AC
NEW QUESTION 7
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?
- A. Active IQ Digital Advisor
- B. Cloud Insights
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: D
NEW QUESTION 8
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. Active IQ Digital Advisor
- B. Active IQ Unified Manager
- C. ONTAP Cluster
- D. AutoSupport packages
Answer: BC
NEW QUESTION 9
Click the Exhibit button.
You are installing a new AFF All SAN Array A700 HA pair.
Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?
- A. 192.168.0.112
- B. 169.254.212.198
- C. 169.254.145.151
- D. 192.168.0.101
Answer: A
NEW QUESTION 10
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster
Network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)
- A. The AFF A250 requires switches with 40GbE port support.
- B. The AFF A250 uses different ports for the cluster and the HA interconnect.
- C. The AFF A250 requires switches with 25GbE port support.
- D. The AFF A250 uses the same port for the cluster and the HA interconnect.
Answer: BC
NEW QUESTION 11
You have a 2-node FAS8300 switchless ONTAP 9.8 clusterthatserves NAS volumes. You have a data
SVMthat connectstothe network usingmultimodeLACPwithVLANtags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?
- A. a0a
- B. e0e
- C. e0e-100
- D. a0a-100
Answer: B
Explanation:
Reference: https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx
NEW QUESTION 12
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?
- A. Active IQ Digital Advisor
- B. Interoperability Matrix Tool
- C. Spot by NetApp
- D. Cloud Manager
Answer: A
Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf
NEW QUESTION 13
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF is a port that provides physical connections.
- B. A LIF is created within a broadcast domain and contains a pool of IP address.
- C. A LIF is an IP address or a WWPN that is associated with a port.
- D. A LIF separates network domains to access cluster data.
Answer: C
NEW QUESTION 14
Click the Exhibit button.
A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V
switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new
switches?
- A. a 10GbE SFP+ to SFP+ cable
- B. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
- C. a 40GbE QSFP+ to QSFP+ cable
- D. a 40GbE QSFP+ to 4x10GbE SFP+ cable
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html
NEW QUESTION 15
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface
groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency
requirements? (Choose two.)
- A. Use ports from different NICs.
- B. Use ports from the same NICs.
- C. Use ports with different chipsets.
- D. Use ports with the same chipsets.
Answer: AD
Explanation:
Reference: https://www.netapp.com/media/19900-tr-4847.pdf (7)
NEW QUESTION 16
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were
automatically discovered by “automatic port placement”.
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
- A. routes
- B. IPspaces
- C. broadcast domains
- D. subnets
Answer: AD
NEW QUESTION 17
Click the Exhibit button.
Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The
customer asks how many ports can be used for the Ethernet host connections.
In this scenario, what would you tell the customer?
- A. 4
- B. 8
- C. 10
- D. 12
Answer: D
NEW QUESTION 18
......
100% Valid and Newest Version NS0-184 Questions & Answers shared by Downloadfreepdf.net, Get Full Dumps HERE: https://www.downloadfreepdf.net/NS0-184-pdf-download.html (New 60 Q&As)