NEW QUESTION 1
Refer to the exhibit.

If you inspect a VXLAN packet at point 2, which two options about the outer fields in the VXLAN
header are true? (Choose 2)

• A. Outer S-MAC = MAC-A ; Outer D-MAC = MAC~B
• B. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-4
• C. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-2
• D. Outer S-|P = IP-1; Outer D-IP = IP-4
• E. Outer S-IP = IP-1; Outer D-IP = IP-2.

Answer: CD

NEW QUESTION 2
Which description of a virtual private cloud is true?

• A. an on-demand configurable pool of shared data resources allocated within a private cloud environment, which provides assigned DMZ zones
• B. an on-demand configurable pool of shared networking resources allocated within a private cloud environment, which provides tenant isolation
• C. an on-demand configurable pool of shared software applications allocated within a public cloud environment, which provides tenant isolation
• D. an on-demand configurable pool of shared computing resources allocated within a public cloud environment, which provides tenant isolation

Answer: D

Explanation:
https://en.wikipedia.org/wiki/Virtual_private_cloud

NEW QUESTION 3
Which two connectivity modes does Cisco RISE support? (Choose 2)

• A. Directly connecte
• B. No virtual port channel is supported.
• C. Indirectly connecte
• D. Only Layer 3 adjacent.
• E. Indirectly connecte
• F. Only Layer 2 adjacent
• G. Indirectly connecte
• H. Layer 2 and Layer 3 adjacent.
• I. Directly connecte
• J. Virtual port channel is supported.

Answer: CE

NEW QUESTION 4
You are setting up an ACI spine-leaf architecture and interconnecting the spine switches with the leaf
switches. Which description of what happen initial setup to activate these interlinks is true?

• A. Fabric Path must be configured on the interlinks
• B. The interlinks are Layer 2 connections and only the allowed VLAN list must be added.
• C. The links are creating a Layer 3 network, and all links must be configured as point-to-point links.
• D. An overlay is created automatically, which creates a setup where the uplinks do not need to be managed manually.

Answer: D

NEW QUESTION 5
Refer to the exhibit.

How many virtual adapters (vNIC and vHBA) can be added to this host?

• A. 128
• B. 130
• C. 256
• D. 258

Answer: C

NEW QUESTION 6
DRAG DROP
Drag and drops the feature from the left onto the correct description on the right

Answer:

Explanation:

NEW QUESTION 7
What data modeling language is commonly used by NETCONF?

• A. YANG
• B. XML
• C. REST
• D. HTML

Answer: A

NEW QUESTION 8
A user requests one primary VLAN,two community VLANs and two isolated VLANs for multicasts
capable servers that must transmit multicast traffic and receive multicast traffic through the use of IGMPv2 on which VLAN must the IGMP querier be configured?

• A. isolated VLAN and both community VLANs
• B. only the primary VLAN
• C. primary and secondary VLANs
• D. Layer 2 multicast is not supported when using private VLANs

Answer: A

NEW QUESTION 9
Refer to the exhibit.

Which two statements about this output are true? (Choose two)

• A. Ethanlyzer is a licensed feature
• B. Output indicate the traffic passing from one module to another (non-SUP)
• C. Ethanlyzer is available in all CISCO IOS/NX-OS/IOS-XR devices
• D. Outputs can be filtered using Wireshark filters
• E. Output are for all traffic going to the SUP
• F. Output shown are redirected to the logging flash

Answer: DE

NEW QUESTION 10
How many revisions of log files is kept by Cisco Cloud Center?

• A. 25
• B. 5
• C. 20
• D. 10

Answer: D

NEW QUESTION 11
Refer to exhibit.

Which two statements about this command are true? (Choose two)

• A. The command is usually used FCIP over the overlay
• B. The command is used to extend the spanning tree for VLAN 72 across the overlay
• C. The command is used to enable unknown unicast flooding for a known MAC address across the overlay
• D. The command is used in HSRP localization for OTV
• E. The command is usually used for Microsoft network load balancing implementation

Answer: CE

NEW QUESTION 12
You have been asked to review the loT migration plans for manufacturing plant. Which technology
should take priority?

• A. Applications
• B. Sensors
• C. Security
• D. Ethernet Switches
• E. Wi-Fi Infrastructure

Answer: B

NEW QUESTION 13
Which technology, implemented on aggregation-edge nodes at the aggregation layer, provides per-
tenant isolation at Layer 3, with separate dedicated per-tenant routing and forwarding tables on the inside interfaces of firewall contexts?

• A. VDC
• B. VRF-lite
• C. VXLAN
• D. VLAN

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/VMDC/2-2/design_guide/vmdcDesign22/VMDC_2-2_DG_2.html

NEW QUESTION 14
DRAG DROP
Drag and drop the fault from the left onto its correct description on the right.

Answer:

Explanation: Informational -- a basic notification or informational message
Minor -- a non service-effecting fault condition that requires corrective action to prevent a more serious fault from occuring
Major -- a service-effecting condition that requires urgent corrective action
Critical -- a service-effecting condition that requires immediate corrective action
Warning --a potential or impending service-effecting fault that currently has no significance effects in the system

NEW QUESTION 15
According to Cisco, which two options are benefits of ITD compared to WCCP? (Choose two)

• A. requires less TCAM entries
• B. weighted load distribution
• C. much less configuration
• D. transparent for service node
• E. does not require authentication or certificates

Answer: AB

NEW QUESTION 16
Which two characteristics of an loT network are true? (Choose two.)

• A. loT networks are 100% reliable.
• B. loT networks must be designed for low-powered devices.
• C. The transmission rate in anloT network is consistent.
• D. loT networks are bandwidth constrained.
• E. loT networks use IS-IS for routing.

Answer: BD

NEW QUESTION 17
DRAG DROP
Drag and Drop the key components of LISP from left onto the correct definitions on the right

Answer:

Explanation: Ingress tunnel router – it receives packets from site-facing interfaces (internal hosts) and either
LI SP encapsulates packets to remote LISP sites or the ITR natively forwards packets to non LISPsites. Egress tunnel router – It receives packets from core-facing interfaces (the internet) and either decapsulates LISP packets or delivers them to local EIDs at the site Map server – it receives map- register control packets from ETRs.
Map resolver – it receives map-requests encapsulated to it from ITRs.
Routing locators – It is assigned to devices that makeup the global routing system. Endpoint identifiers --- it is assigned to end hosts.
Note: Looks correct, just double check cisco definitions of Ingress/Egress Tunnel routers.

NEW QUESTION 18
Which description of how to enable DIMM blacklisting is true?

• A. Enable blacklisting in the servers > policy subtab
• B. Enable blacklisting in the servers inventory > memory subtab
• C. Configure a memory policy under the services tab
• D. Configure a memory policy in the equipment > policy subtab

Answer: A

NEW QUESTION 19
Which of the following statements regarding Multi-Pod deployment is true?

• A. Each Pod is assigned a separate and not overlapping TEP pool
• B. TEP pools are used for layer 2 communication between the Pods
• C. Each Pod selects its own TEP pool as its locally significant
• D. TEP pool are not redistributed to the leaf nodes as they are only limited to spines

Answer: A

Explanation: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737855.html