NEW QUESTION 1
Your network contains an Active Directory forest. The forest contains an enterprise certification authority (CA) named CA01. The CRL distribution point (CDP) is configured to use LDAP.
You have a System Center Configuration Manager server named CM01.
You configure on-premises mobile device management (MDM). You have a domain-joined computer that runs Windows 10. You successfully enroll the computer into MDM.
You need to ensure that you can enroll a non-domain-joined computer into MDM. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/sccm/mdm/get-started/set-up-device-enrollment-on-premises-mdm
https://docs.microsoft.com/en-us/sccm/mdm/get-started/set-up-certificates-on-premises-mdm#bkmk_exportCert

NEW QUESTION 2
You have a deployment of System Center Configuration Manager (Current Branch). You configure the environment for co-management.
You need to install the Configuration Manager client on all computers that are enrolled in Microsoft Intune. Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Distribute the Configuration Manager client installation files to the cloud-based distribution point.
• B. From Intune, deploy an app that contains Ccmsetup.msi.
• C. From Configuration Manager, deploy a cloud-based distribution point.
• D. From Configuration Manager, enable site-wide client push installation.
• E. From Intune, deploy an app that contains Client.msi.

Answer: BDE

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a deployment of System Center Configuration Manager (Current Branch). You configure a cloud management gateway for Configuration Manager.
You have a client computer that is currently on the corporate network.
You need to force the computer to get the location of the cloud management gateway immediately. Solution: You restart the Network Location Awareness service.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to deploy System Center Configuration Manager (Current Branch) by using an initial pilot deployment
The pilot deployment will contain five computers that run Windows 10.
You need to deploy the Configuration Manager client to the five computers only. Solution: From each client, you run CMEnroll.exe.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 5
You use System Center Configuration Manager (Current Branch) to manage client computers that run Windows 7. You have a Microsoft Application Visualization {App-V) package named Appl.
You need to deploy App1 to the computers by using Configuration Manager and ensure that the App1 runs. What should you do first?

• A. Install the App-V Sequencer on a reference computer.
• B. From the Configuration Manager console, create an App-V virtual environment.
• C. Deploy the App-V client to the computers.
• D. Configure the Enable App-V Client setting by using a Group Policy object (GPO).

Answer: D

Explanation: References:
https://docs.microsoft.com/en-us/windows/application-management/app-v/appv-enable-the-app-v-desktop-client

NEW QUESTION 6
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario.
Your network contains an Active directory forest named adatum.com.
All client computers run Windows 10 Enterprise. All the computers are named by using the name of their respective department and an incremental three-digit number. For example, the first computer in the sales department is named Sales001.
Several managers use tablets that run Windows 10 and have 3 GB of RAM. All other client computers have at least 8 GB RAM.
Adatum.com is synchronized to Microsoft Azure Active Directory. Your company implements the Microsoft Store for Business.
You have a deployment of System Center Configuration Manager (Current Branch) that has discovery configured. All the client computers have the Configuration Manager client installed.
The company uses the applications shown in the following table.

The company identifies the following requirements for software deployments:
View the Upgrade Readiness data of all the client computers.
Deploy App1 to the client computers in the marketing department.
Deploy App2 to the client computers in the human resources (HR) department.
Monitor the usage of App3.
Deploy SalesAppLite to sales department computers that have 3 GB of RAM or less.
Deploy SalesAppFull to sales department computers that have more than 3 GB of RAM.
You create a cloud-based distribution point that has a public name of d1594d4527614a09b934d470. End of repeated scenario.
The company creates a new department named research.
You need to deploy App2 and App3 to the client computers in the research department.
How should you configure the membership rule for the Research collection? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: References: https://technet.microsoft.com/en-us/library/hh967533.aspx https://technet.microsoft.com/en-us/library/gg712323.aspx

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a deployment of System Center Configuration Manager that collects the hardware inventory of Windows and Linux client computers.
You need to capture additional information about the hardware on the Linux computers. Solution: You create NOIDMIF files to add information to the client hardware inventory. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 8
You have a deployment of System Center Configuration Manager (Current Branch). You add the cloud management gateway connector point to the deployment.
Which site system role can be configured to receive the traffic from the cloud management gateway?

• A. Service connection point
• B. Distribution point
• C. Management point
• D. Endpoint Protection point

Answer: C

Explanation: References: https://www.systemcenterdudes.com/how-to-setup-an-sccm-cloud-management-gateway/

NEW QUESTION 9
You have a System Center Configuration Manager (Current Branch) hierarchy that contains a single primary server named cm01.contoso.corp.
You have a Web Application Proxy that presents the management point and the distribution point to the Internet as sccm.contoso.com.
You have a user who has a client computer that runs Windows 10. The user currently works at a customer site. The user has access to the Internet but cannot access the customer’s corporate network.
You discover that the Configuration Manager client on the computer has an issue. You need to reinstall the Configuration Manager client on the computer.
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References: https://docs.microsoft.com/en-us/sccm/core/clients/deploy/about-client-installation-properties

NEW QUESTION 10
You deploy Microsoft Office 365 ProPlus by using Configuration Manager.
You need to use Configuration Manager to update Office 365 ProPlus as soon as possible.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: https://docs.microsoft.com/en-us/deployoffice/manage-updates-to-office-365-proplus-with-system-center-config

NEW QUESTION 11
You deploy System Center Configuration Manager (Current Branch) to manage desktop computers. On the reporting services point, you discover that the following reports are missing:
Application Deployment – Historical
List of Malware Detected – Historical
General Software Inventory – Historical
General Hardware Inventory – Historical
Infrastructure Health Overview – Historical
Software Distribution Summary – Historical
Endpoint Protection and Software Update Compliance – Historical
You need to ensure that you can generate reports for long-term historical data.
What should you do first?

• A. Create report subscriptions.
• B. Install Microsoft SQL Server Report Builder.
• C. Modify the properties of the reporting services point.
• D. Add a Data Warehouse service point.

Answer: D

Explanation: References: https://docs.microsoft.com/en-us/sccm/core/servers/manage/data-warehouse

NEW QUESTION 12
You have a device collection named Collection1.
Currently, you use an automated deployment rule (ADR) to deploy updates as quickly as possible to Collection1.
You need to ensure that the updates are installed during a predefined period of time. The solution must affect the updates only.
What should you do?

• A. From the Membership Rules tab of Collection1, schedule an incremental update of the collection.
• B. From the Maintenance Windows tab of Collection1, create a new schedule that applies to all deployments.
• C. From the Membership Rules tab of Collection1, schedule a full update of the collection.
• D. From the Maintenance Windows tab of Collection1, create a new schedule that applies to software updates only.

Answer: D

Explanation: References: https://technet.microsoft.com/en-us/library/hh508762.aspx

NEW QUESTION 13
You have a deployment of System Center Configuration Manager (Current Branch). The domain contains the users shown in the following table.

Support Techs is a member of the Administrators group on each client computer. Help Desk Users is a member of the Power Users group on each client computer.
You need to deploy Configuration Manager agents by using a client push installation. The solution must use the principle of least privilege.
Which account should you configure as the client push installation account?

• A. Account1
• B. Account2
• C. Account3
• D. Account4

Answer: B

NEW QUESTION 14
Your company has offices in Toronto and New York. The Toronto office has 1,000 users. The New York office has 500 users.
You have a deployment of System Center Configuration Manager (Current Branch) in a data center. The primary site server hosts the Management point site system role and the Software update point the system role.
A distribution point is deployed to the Toronto office.
You need to deploy Windows 10 to all the client computers in the company by using PXE. The solution must meet the following requirements:
The computers in the New York office will be reformatted. The user data and settings will be discarded. The computers in the Toronto office will be replaced by new computers. The user data and settings will be
migrated by using side-by-side migrations.
Which site system role should you add to each office before the deployment? To answer, drag the appropriate roles to the correct offices. Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/sccm/osd/get-started/prepare-site-system-roles-for-operating-system-deployme

NEW QUESTION 15
Your network contains an Active Directory forest named adatum.com. The forest has a deployment of System Center Configuration Manager (Current Branch). You create two users named User1 and User2 in adatum.com. You plan to delegate the following tasks:
• User1 must be able to create user collections.
• User2 must be able to import driver packages.
You need to add User1 and User2 to security roles. The solution must use the principle of least privilege. To which security role should you add each user? To answer, drag the appropriate roles to the correct users.
Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a deployment of System Center Configuration Manager (Current Branch). You deploy the first primary site server to your organization. Discovery is not configured. You need to deploy the Configuration Manager client to five client computers in a workgroup. Solution: You deploy the client by using a Group Policy software installation. Does this meet the goal?

• A. Yes
• B. No

Answer: B