NEW QUESTION 1
You use a Network Policy Server (NPS) server named NPS1 to authenticate VPN connections and connections to wireless access points (WAPs).
You plan to add a new WAP named WAP1.
What should you do on WAP1 and NPS1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/networking/core-network-guide/cncg/wireless/e-wireless-acce

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You activate the scope.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

NEW QUESTION 3
You have Hyper-V host named Server1.
Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
What should you do?

• A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
• B. From Device Manager on VM1, configure TCP Checksum Offload (IPv4).
• C. From Device Manager on VM1, configure Receive Side Scaling.
• D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.

Answer: C

NEW QUESTION 4
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

• A. the Data Center Bridging feature
• B. the Routing role service
• C. the Network Controller server role
• D. the Multipath I/O feature
• E. the Canary Network Diagnostics feature

Answer: D

Explanation:
https://technet.microsoft.com/en-us/library/jj735302(v=ws.11).aspx

NEW QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2021.
Server1 hosts four machines that are members of the domains. The virtual machines are configured as sown in the following table.

Which virtual machines can you manage by using PowerShell Direct?

• A. Only VM2
• B. VM1, VM2, and VM4
• C. only VM4
• D. VM1, VM2, and VM3

Answer: B

NEW QUESTION 6
You have two servers named Server1 and Server2 that run Windows Server 2021. Both servers have the DHCP Server server role installed.
Server1 has a DHCP scope named Scope1. Server2 has a DHCP scope named Scope2.
You need to ensure that client computers can get an IP address if a single DHCP server fails. You must be able to control the percentage of requests to which each DHCP server responds during normal network operations.
What should you do?

• A. Add Server1 and Server2 as nodes in a failover cluster, and then configure the DHCP Server server role.
• B. Add Server1 and Server2 as nodes in a failover cluster, and then configure the quorum mode.
• C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.
• D. Add Server1 and Server2 as nodes in a failover cluster, and then configure port rules for UDP 67 and UDP 68.

Answer: C

NEW QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1.
Server1 configured to use a forwarder named server2.contoso.com that has an IP address of 10.0.0.10. You need to prevent Server1 from using root hints if the forwarder is unavailable.
What command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of the servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning

NEW QUESTION 9
You have a virtual machine named VM1 that runs Windows Server 2021, VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

• A. Set-NetAdapterRss
• B. Set-NetAdapterRdma
• C. Set-NetAdapterQos
• D. Set-NetAdapterSriov

Answer: A

NEW QUESTION 10
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.

What should you do to enable Server2 as a NAT server?

• A. From Routing and Remote Access, add an interface.
• B. From Windows PowerShell, run the New-RoutingGroupConnector cmdlet.
• C. From Routing and Remote Access, add a routing protocol.
• D. From Windows PowerShell, run the Install-WindowsFeature cmdlet.

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/dd469812(v=ws.11).aspx

NEW QUESTION 11
You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically.
You need to configure the server to have the following IP configurations:
• IP address 172.16.3.100
• Default gateway: 172.163.1
• Subnet mask: 255.255.255.0
What command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

NEW QUESTION 12
Your network contains an Active Directory domain named contoso.com. The Functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows server 2021 standard. The domain contains 100 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 13
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)


You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

• A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
• B. From Windows PowerShell on Server1, run Set-VmNetworkAdapter cmdlet.
• C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
• D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Answer: B

Explanation:
References: https://www.techsupportpk.com/2021/01/nic-teaming-in-hyper-v-on-windows-server-2021.html

NEW QUESTION 14
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.

\ContosoNamespace1Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise, select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 15
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host.
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)-capable. You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The
solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/mt403349.aspx

NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on VM2. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You set the Expires after value of the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 18
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server4, and Server5 that run Windows Server 2021.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit. (Click the Exhibit button.)

You configure the replication schedule for \Contoso.comNamespace1Folder1 as shown in the Replication Schedule exhibit. (Click the Exhibit button.)

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphics.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
The Replicated Folder (Folder1) refers to the name of the DFS target, not the name of the local folder. It does not matter if the local folder name does not match the name of the DFS target. Therefore, replication will work as normal according to the configured schedule.

NEW QUESTION 19
You have a Hyper-V host named Host1 that runs Windows Server 2021 Datacenter. Host1 has eight network adapters that support Remote Direct Memory Access (RDMA).
You plan to configure Host1 as part of a four-node Hyper-V converged solution. You enable the Data Center Bridging (DCB) feature.
You need to enable Switch Embedded Teaming (SET) and RDMA.
Which three cmdlets should you run in sequence? To answer move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Routing and Remote Access, You configure the Properties of Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 21
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private1. VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to Private1 and External1. You install the Remote Access server on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 and VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 22
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.
You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?

• A. New-NetNeighbor
• B. New-NetRoute
• C. Set-NetTcpSetting
• D. Set-NetNeighbir

Answer: B

NEW QUESTION 23
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/netadapter/get-netadaptersriov?view=win10-ps

NEW QUESTION 24
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday. Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 25
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 26
......