Proper study guides for Rebirth HUAWEI HCIA-Datacom V1.0 certified begins with HUAWEI H12-811_V1.0 preparation products which designed to deliver the Printable H12-811_V1.0 questions by making you pass the H12-811_V1.0 test at your first time. Try the free H12-811_V1.0 demo right now.
Free demo questions for HUAWEI H12-811_V1.0 Exam Dumps Below:
NEW QUESTION 1
What kind of packets does the OSPF protocol use to request LSAs that are missing locally? ()
- A. LSACK
- B. LSR
- C. LSU
Answer: C
NEW QUESTION 2
The DHCPv6 server supports the provision of other configuration information such as DNS server addresses for the host. ()
- A. True
- B. False
Answer: A
NEW QUESTION 3
At which layer of the OSI reference model do Ethernet switches operate? ( )
- A. Network layer
- B. Data link layer
- C. Physical layer
- D. Transport layer
Answer: B
NEW QUESTION 4
The login timeout time in the VRP system can only be set under the vty interface. ()
- A. True
- B. False
Answer: B
NEW QUESTION 5
If the network address of a network is 10.1.1.0/30, what is its broadcast address? ()
- A. 10.1.1.3
- B. 10.1.1.4
- C. 10.1.1.1
Answer: B
NEW QUESTION 6
Currently, the company has a network administrator, and the AR2200 in the company network can be remotely managed by directly entering the password through Telnet. After the two new network administrators arrived, the company hopes to assign their own user names and passwords to all the administrators, as well as different levels of authority. So how should it be done? ()
- A. Each administrator uses a different public IP address of the device when running the Telnet command
- B. The user authentication mode configured by Telnet must be AAA.
- C. When configuring each administrator’s account, different permission levels need to be configured
- D. Configure three user names and their corresponding passwords in the AA
- E. view
Answer: BCD
NEW QUESTION 7
The switch becomes a logical switch after stacking and clustering, and Eth-Trunk across physical devices can be deployed to improve network reliability. ()
- A. True
- B. False
Answer: A
NEW QUESTION 8
DHCP is an application layer protocol. In order to make it more reliable when assigning P, its transport layer uses TCP protocol.
- A. True
- B. False
Answer: B
NEW QUESTION 9
Which of the following interfaces are not open to Huawei controllers?
- A. NETCONF
- B. RESTful
- C. AAA
- D. OpenFlow
Answer: D
NEW QUESTION 10
The router forwards data according to the IP routing table, and the Layer 2 switch forwards data according to the MAC. address table
- A. True
- B. False
Answer: A
NEW QUESTION 11
All interfaces of routers running 0SPF protocol must belong to the same area. ()
- A. True
- B. False
Answer: B
NEW QUESTION 12
Now you need to implement a Python automation script Telnet to the device to view the running configuration of the device. What is wrong with the following statement? ()
- A. Telnetli
- B. can achieve this function.
- C. Use telnet.Telnet (host) to connect to the Telnet server.
- D. You can use telnet.write (b\) to input the command to view the current configuration of the device.
- E. Telnet.close() is used every time a command is entered, and the function is that the user waits for the switch to return informatio
- F. ·
Answer: D
NEW QUESTION 13
What is the range of VLAN ID that users can use? ()
- A. 1-4096
- B. 1-4094
- C. 0-4096
- D. 0-4095
Answer: B
NEW QUESTION 14
What is the value of the Type field in the RStp configuration BPDU message? ()
- A. 0x01
- B. 0x00
- C. 0x02
- D. 0x03
Answer: C
NEW QUESTION 15
The output information of a certain device is shown in the figure. Which of the following statements is correct? ( )
display interface G1gabitEthernet 0/0/0 G1 gabi tEthernet0/0/0 currentstate UP Line protocol current state UP Route PortThe Maximum Transmit Unit is 1000 Internet Address is 10.0.12.2/24 IP Sending Frames'Format is PRTFMT ETENT 2.Hardware address is 00e0-fc22-4fff Port Mode:FORCE COPPER SpeeD.:100, Loopback:NONE Duplex:FULL, Negotiation:DISABLE Md1 AUTO Last 300 seconds input rate 24 bits/seC.0 packets/sec Last 300 seconds output rate 24 bits /seC.0 packets/seC.*
- A. The P address of the interface is 10.0.12.2/24
- B. The MAC of the interfac
- C. The address is 00e0-fc22-4fff
- D. The working rate of this interface is 1Gbps
- E. The MTU value of this interface is 1000
Answer: ABD
NEW QUESTION 16
......
Thanks for reading the newest H12-811_V1.0 exam dumps! We recommend you to try the PREMIUM Thedumpscentre.com H12-811_V1.0 dumps in VCE and PDF here: https://www.thedumpscentre.com/H12-811_V1.0-dumps/ (730 Q&As Dumps)