NEW QUESTION 1
What is a benefit of NVMe technology?

• A. optimized SMB workloads
• B. minimized network bandwidth
• C. lower application costs
• D. low latency data access

Answer: D

NEW QUESTION 2
A customer is purchasing a large number of servers for a business critical application. They are concerned about return to service times and want immediate assistance with critical events.
Which HPE service meets the customer’s needs?

• A. HPE Proactive Service Credits
• B. HPE Proactive Care Advanced
• C. HPE Proactive Care
• D. HPE Foundation Care

Answer: C

NEW QUESTION 3
A customer wants to implement a large Microsoft Storage Spaces Direct environment. Which protocol should the customer use?

• A. VXLAN
• B. RDMA
• C. OSPF
• D. NVGRE

Answer: D

NEW QUESTION 4
What is required to enable Jitter Smoothing technology? (Choose two.)

• A. HPE Apollo
• B. ProLiant Gen 10
• C. HPE Synergy
• D. HPE Cloudline
• E. iLO5 Advanced

Answer: BE

NEW QUESTION 5
A customer needs to maximize Hyper-V Live Migration performance. What technology will meet the customer’s requirement?

• A. virtual extensible LAN(VXLAN)
• B. Fibre Channel over Ethernet (FCoE)
• C. network virtualization using generic routing encapsulation (NVGRE)
• D. RDMA over Converged Ethernet (RoCE)

Answer: D

NEW QUESTION 6
A health care customer is running out of space in their small on-site data center. They need a solution for their next generation infrastructure for their hospital and clinics.
proposed infrastructure needs the ability to run ESXi 6.5 with around 100 medium sized VMs
customer has five remote clinics
each clinic needs to be able to run approximately 10 VM’s locally
all of the VM’s in the clinics need to be fully backed up every night
What is the most appropriate solution to lead with?

• A. HPE SimpliVity 380 Gen10
• B. HPE DL380 Gen10
• C. HPE Apollo AR4200
• D. HPE Synergy populated with SY480 Gen10 Compute

Answer: A

NEW QUESTION 7
A customer needs to boot from PXE with IPv6 across the Gen10 servers. Which option must be enabled to use this feature?

• A. UEFI Boot with IPv6 enabled
• B. Legacy One-Time boot menu
• C. UEFI Secure Boot
• D. HPE Intelligent Provisioning with IPv6 DHCP

Answer: A

NEW QUESTION 8
A customer wants to streamline firmware and driver management of their HPE Synergy nodes running VMware hypervisor.
They want to implement HPE Smart Update Tools (SUT). Which of the following options applies to the solution?

• A. HPE Support Pack for ProLiant (SPP) is uploaded to Composer and applied to the profile
• B. All VMware updates and drivers are downloaded by HPE OneView
• C. ICsp coordinates firmware and driver updates
• D. Each server must be booted to the SPP through iLO Console virtual media by the administrator

Answer: A

NEW QUESTION 9
A customer has a ProLiant DL-based server solution. The customer is experiencing I/O timeouts on their SQL data volume running on this solution. Which solution will increase the application performance?

• A. Upgrade memory to 2666 MHz DDR4
• B. Upgrade the current processor to a Xeon-Platinum
• C. Install an SSD drive and SmartCache license
• D. Install an SSD drive to host the log volume

Answer: B

NEW QUESTION 10
A customer plans to use RESTful API to deploy their rack of DL380 Gen10 system. How does use of this protocol support the customer? (Select two.)

• A. support multiple scripting languages
• B. Secure remote scripting
• C. Ability to run scripts against multiple servers
• D. Boot via SFTP
• E. Boot via HTTP

Answer: AB

NEW QUESTION 11
A customer needs a solution to support Online Transaction Processing (OLTP) and database workloads. Which Gen10 technology would optimize the environment for the customer?

• A. REST API
• B. Silicon Root of Trust
• C. workload profiles
• D. OneView

Answer: C

NEW QUESTION 12
A customer purchased HPE ProLiant Gen10 servers. The customer is transitioning from a physical to a virtual environment.
Which feature should be enabled to ensure that they get the optimal performance from their new servers?

• A. UEFI optimized boot
• B. Integration with an HPE OneView for VMware vCenter
• C. Performance optimization using the workload profiles
• D. OneView OS Build Plan

Answer: C

NEW QUESTION 13
What are features of the HPE Synergy Planning Tool? (Choose two.)

• A. It creates a REST configuration file based on configuration created
• B. It recommends the best top-of-rack switch
• C. It provides estimated power consumption and weights of the solution
• D. It runs on the Partner Ready Portal
• E. It aids configuration of rack, Frames, compute, storage, fabric and power

Answer: CE

NEW QUESTION 14
While preparing to implement a Synergy solution, you notice the uplinks are all rated at 10Gb/s and consume four of the HPE Virtual Connect SE 40Gb F8 Module ports. They want to maximize free ports for future growth.
Which change would improve the design and increase customer satisfaction?

• A. Use a QSFP+ transceiver and AOC in place of the SFP+ DAC cables.
• B. Use a QSFP+ AOC, and remove the SFP+ DAC cables and QSFP+ to SFP+ adapters.
• C. Use a QSFP+ DAC splitter cable, and remove the SFP+ DAC cables and QSFP+ to SFP+ adapters.
• D. Use a MPO to Quad LC splitter cable in place of the SFP+ DAC cables.

Answer: C

NEW QUESTION 15
Match the HPE management tool to the customer situation. (Each customer situation may be used more than once or not at all.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Built in tools managing single systems – not used
Cloud-based tools to manage multiple systems – Remote Support and Insight Online
Customer site tools to manage multiple systems – HPE OneView and iLO Amplifier Pack

NEW QUESTION 16
While installing a three frame Synergy solution, only two of the frames are identified during the discovery process.
What should you do to get resolution?

• A. Remove and re-insert the standby Composer
• B. Issue a refresh command to the enclosure
• C. Open the front panel of the Composer, and read the error message
• D. Validate Frame Link Module topology

Answer: D

NEW QUESTION 17
A customer exceeded the number of available VLANs on their network. To resolve this issue, they enabled VXLAN. They inquire about upgrading their servers with the FlexFabric 650 series NIC after this change.
What is the benefit of tunnel offload?

• A. supports data deduplication when VXLAN is enabled
• B. decreases memory load caused by VXLAN
• C. supports data inflight encryption when VXLAN is enabled
• D. decreases CPU load caused by VXLAN

Answer: D

NEW QUESTION 18
You are introducing Synergy to a new customer. Which tool can you use to demonstrate the physical components of the Synergy frame and how they connect?

• A. HPE Product Bulletin
• B. HPE Synergy Planning Tool
• C. HPE Product Tour
• D. HPE PartSurfer

Answer: B

NEW QUESTION 19
Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual workloads. They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?

• A. HPE OneView for VMware vCenter
• B. HPE OneView Global Dashboard
• C. HPE OneView for Microsoft System Center
• D. HPE OneView for Red Hat Enterprise Virtualization

Answer: B

NEW QUESTION 20
A customer finishes a proof of concept (PoC) evaluation of a DL380 Gen10 system and needs to securely overwrite all internal system storage and attached hard disks by applying random patterns in a three-pass process following security guidelines before the system can be redeployed. Which tool should be used?

• A. OneView
• B. Smart Storage Administrator
• C. Image Streamer
• D. Intelligent Provisioning

Answer: D

NEW QUESTION 21
......