NEW QUESTION 1
Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

• A. to reduce risk during volume rebuild
• B. to increase write performance on the volume
• C. to maximize capacity of the volume
• D. to reduce drive wear

Answer: A

NEW QUESTION 2
You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer’s requirements?

• A. block device
• B. replication target
• C. NDMP target
• D. VTL device

Answer: D

NEW QUESTION 3
A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?

• A. Insight Online
• B. Smart Storage Administrator
• C. Intelligent Management Center
• D. InfoSight

Answer: B

NEW QUESTION 4
Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

• A. Lights-Out Online Configuration Utility
• B. OneView
• C. UEFI Control Suite
• D. Intelligent Management Center
• E. Smart Storage Administrator

Answer: AE

NEW QUESTION 5
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.
Which HPE tool should you use?

• A. Central Management Console
• B. UEFI
• C. System Management Homepage
• D. InfoSight

Answer: C

NEW QUESTION 6
A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.)

• A. Use Smart Storage Administrator (SSA) to view the STATS report on the MSA
• B. Use NIC teaming utility to validate the iSCSI initiator configuration
• C. Use remote console to check the switch port configuration
• D. Use remote console to validate the WWNs on the MSA
• E. Use remote console to ensure correct MSA port configuration

Answer: CE

NEW QUESTION 7
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer’s requirements?

• A. Nimble CS1000
• B. Nimble SFA
• C. Nimble AF1000
• D. Nimble AF5000

Answer: B

NEW QUESTION 8
A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042. Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.
How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?

• A. 1
• B. 4
• C. 8
• D. 12

Answer: C

NEW QUESTION 9
A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?

• A. 1 Gb iSCSI connectivity
• B. thin provisioning
• C. RAID 6 Advanced Data Guarding (ADG)
• D. optimal flash acceleration

Answer: D

NEW QUESTION 10
You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array.
What should you explain to this customer?

• A. Using drives with different capacities in a single array increases the chance of disk failure
• B. The extra capacity of the larger drives will not be utilized
• C. The process to create the array will fail, and the server will not boot
• D. The RAID level will be set at RAID 0 automatically

Answer: B

NEW QUESTION 11
A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures. Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

• A. Support case resolutions are automatically generated for them based on real-time analyses
• B. HPE is given remote access rights to registered devices for quick and accurate problem resolution
• C. HPE Proactive Care is enabled and cases are created automatically in the event of hardware failures
• D. Proactive Scan reports and firmware/software analysis reports can be provided from collected data
• E. Real-time performance analytics result in failure predictions and online self-healing

Answer: CD

NEW QUESTION 12
A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer’s needs?

• A. Nimble
• B. StoreVirtual
• C. StoreEasy
• D. MSA

Answer: D

NEW QUESTION 13
A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

• A. Isolate the management network from production traffic
• B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data
• C. Configure IRF on the switches
• D. Configure in-band management to manage the switches through gigabit Ethernet ports

Answer: A

NEW QUESTION 14
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

• A. at the top of the rack with the cables running between the RETMA rails
• B. horizontally on extension bars mounted directly to the frame for improved clearance
• C. in the bottom bay of the rack with the outlets facing the front
• D. vertically, side by side on both sides of the rack with the outlets facing the center

Answer: D

NEW QUESTION 15
You need to change BIOS configuration settings without rebooting a server. Which system utility should you use?

• A. Intelligent Management Center
• B. Lights-Out Online Configuration utility
• C. intelligent Provisioning
• D. smart Storage Administrator

Answer: C

NEW QUESTION 16
A customer requires a software-defined storage solution. Which storage solution meets the customer’s needs?

• A. HPE MSA
• B. HPE StoreVirtual VSA
• C. HPE 3PAR StoreServ
• D. HPE Nimble Storage

Answer: B

NEW QUESTION 17
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?

• A. HPE ProLiant DL560 Gen10 with LFF SAS drives
• B. HPE ProLiant DL380 Gen10 with LFF SAS drives
• C. HPE ProLiant ML110 with SFF SAS drives
• D. HPE ProLiant DL560 Gen9 with SFF SAS drives

Answer: B

NEW QUESTION 18
You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

• A. The Smart Array controller assigns the device number automatically based on the bay
• B. HPE OneView uses the server profile to assign the device number
• C. The operating system assigns the device number automatically based on the drive installation order
• D. You must use Smart Storage Administrator to assign the device number

Answer: A

NEW QUESTION 19
A customer is upgrading their network infrastructure to provide the best performance for IP storage.
Which technologies in a network switch meet the customer’s needs? (Choose three.)

• A. Jumbo Frames
• B. Deep Packet Buffers
• C. LLDP Support
• D. MLAG Support
• E. Fibre Channel Support
• F. Static Routing

Answer: ABD

NEW QUESTION 20
A customer needs to virtualize their storage across physical servers and storage environments. Which HPE solution meets the customer’s needs?

• A. Nimble CS3000
• B. StoreVirtual 4335
• C. StoreVirtual VSA
• D. MSA 2050

Answer: C

NEW QUESTION 21
......