NEW QUESTION 1
Refer to the exhibit.

Which tool is shown?

• A. Cisco WCS client troubleshooting tool
• B. Cisco WLC client troubleshooting tool
• C. WLAN Client Debug Analyzer
• D. Cisco WLAN Connection Advisor

Answer: A

NEW QUESTION 2
Refer to the exhibit.

When the Admin Status of an access point is enabled, what does this mean in radios?

• A. 802 11a/n/acisDOW
• B. but the 802 11 b/g/n radio is UP by default.
• C. 802.11a'rVac is U
• D. but the 802 11 b/g/n radio is DOWN by default.
• E. 802 11a'n/ac and 802_ 11 b/g/n radios can be UP or DOWN.
• F. 802_11a/n/ac and 802 11 b/g/n radios must be UP.

Answer: A

NEW QUESTION 3

Refer to the exhibit. Based on the diagram, what two design requirements must be met? (Choose two.)

• A. WGB is Autonomous
• B. WGB is Universal
• C. WGB can be Autonomous or Universal
• D. Upstream AP is Aironet
• E. Upstream AP is not Aironet
• F. Upstream AP can be any make/model

Answer: AD

NEW QUESTION 4
You have a small organization with multiple Cisco WCS servers. Management has become cumbersome and you are planning to deploy Cisco WCS Navigator.
When the Cisco WCS Navigator has been deployed, how are the existing Cisco WCS servers added to the Cisco WCS Navigator, which software versions are supported, and which protocol(s) do they use to communicate with Navigator?

• A. Cisco WCS Navigator searches the enterprise intranet to locate the existing Cisco WCS servers and adds them automatically using SOAP as long as there is only a difference of one version or less between Cisco WCS and WCS Navigator.
• B. Each existing Cisco WCS server must be added manually and use SOAP/HTTP to communicate with the Cisco WCS Navigator platform as long as the software versions of Cisco WCS and Cisco WCS Navigator are the same.
• C. Cisco WCS must be on the same software version as Cisco WCS Navigator and each Cisco WCS server is added automatically using XML over HTTP.
• D. When Cisco WCS Navigator is added, all the Cisco WCS servers must be added manually, each system must use the same software release as Navigator, and the Cisco WCS communicates with Cisco WCS Navigator by using SOAP/XML over HTTPS.

Answer: D

NEW QUESTION 5
Which Cisco AnyConnect module provides wireless connectivity?

• A. telemetry
• B. web security
• C. VPN
• D. NAM
• E. DART
• F. posture
• G. CSSC

Answer: D

NEW QUESTION 6
A customer needs wireless access points on a different VLAN from the controller to join via broadcast. Which two commands are required on the Layer 3 switch? (Choose two.)

• A. ip forward-protocol tcp 5246
• B. ip helper-address <WLC-Multicast-Address>
• C. ip helper-address <WLC-Virtual-Address>
• D. ip forward-protocol udp 5246
• E. ip helper-address <WLC-Management-Address>

Answer: DE

NEW QUESTION 7
You have created a new WLAN. However, no clients can connect and the SSID does not appear on the available wireless networks Which cause of the issue is true?

• A. The WLAN is disabled
• B. The WLAN has the wrong NAS ID
• C. The WLAN controller needs a restart for the new configuration to take effect
• D. The WLAN is mapped to an incorrect interface or interface group

Answer: D

NEW QUESTION 8
When creating a wireless profile in the Cisco ADU and you have selected the WPA/WPA2/CCKM radio button option, what other decision must you make and then configure on this same screen?

• A. the address and the server secret of the authentication device you will authenticate with
• B. the encryption type
• C. the EAP type to be used for authentication
• D. the length and value of the pre-shared key
• E. the SSID of the wireless client

Answer: C

NEW QUESTION 9
What two AP configurations will show RF prediction on maps in WCS? (Choose two.)

• A. Lightweight APs with internal antennas
• B. Lightweight APs with external Cisco antennas
• C. Lightweight APs with external 3rd Party antennas
• D. Autonomous APs with internal antennas
• E. Autonomous APs with external Cisco antennas
• F. Autonomous APs with external 3rd Party antennas

Answer: AB

NEW QUESTION 10
Refer to the exhibit.

What is the meaning of the inverted orange triangle (marked "0") in the Alarm Summary tab of Cisco WCS?

• A. number of major alarms
• B. number of minor alarms
• C. number of critical alarms
• D. number of system alarms

Answer: A

NEW QUESTION 11
Due to the terrain, a deployment requires a point-to-point wireless bridge to allow for network connectivity to a remote building. What 5GHz band would permitted to use the highest power in the U.S.?

• A. U-NII-3
• B. U-NII-2 Extended
• C. U-NII-2
• D. U-NII-1

Answer: A

NEW QUESTION 12
Which two elements are needed to create a secure SSID on an autonomous AP? (Choose two.)

• A. SSID name
• B. WLC MAC address
• C. PSK
• D. LDAP server
• E. WLC IP

Answer: AC

NEW QUESTION 13
Refer to the exhibit.

Which option is the received signal power level at the receiver?

• A. -46
• B. -49.28
• C. -45
• D. -40.72

Answer: C

NEW QUESTION 14
Which option is needed to earn the Cisco Compatible credential for Cisco Compatible Extensions Lite?

• A. Foundation and Management are required.
• B. Location and Management are required.
• C. Foundation and Location are required.
• D. Foundation and Voice are required.
• E. Voice is required.
• F. Foundation is required.
• G. Location is required.
• H. Management is required.

Answer: F

NEW QUESTION 15
Refer to the exhibit.

Which syslog facility option is shown?

• A. an information field, which is added to every message that comes from the WLC
• B. a security feature, which is set on the syslog server
• C. the type of syslog server
• D. the Cisco WLC identifier for this syslog server

Answer: A

NEW QUESTION 16
An engineer has been asked to upgrade the code on a WLC that is running Cisco AireOS 8.0. Which two protocols can be used to download the code file to the controller? (Choose two.)

• A. SNMPv2c
• B. FTP
• C. SNMPv3
• D. SFTP
• E. HTTPS

Answer: BD

NEW QUESTION 17
You are designing a wireless network in a medical facility. Which three areas are bad locations in which to install a wireless access point? (Choose three.)

• A. in front of the elevators doors
• B. in the hallways
• C. next to the electrical room
• D. inside offices
• E. near medical imaging devices
• F. in the lobby

Answer: ACE