NEW QUESTION 1
Which of the following printer types requires calibration to ensure the nozzle is adjusted to print properly?

• A. Impact
• B. Inkjet
• C. Laser
• D. Thermal

Answer: B

Explanation: http://computer.howstuffworks.com/inkjet-printer.htm

NEW QUESTION 2
A network technician has been tasked with deploying new VoIP phones on a network. When the technician plugs the Ethernet cable for the phone into the wall port, the phone fails to turn on. When the technician plugs the Ethernet cable directly into the computer, the computer is able to access the network. Which of the following is the MOST likely cause of this issue?

• A. The network switch does not support PoE
• B. The technician is connecting the phone to the wrong type of port
• C. The firewall on the network is blocking access to the DHCP server
• D. The Ethernet cable is the wrong type

Answer: A

NEW QUESTION 3
When installing a floppy drive data cable, it is important for a technician to ensure which of the following? (Select TWO).

• A. Availability of compatible power connectors
• B. Adequate hard drive capacity
• C. Correct CPU clock speeds
• D. Correct Master/Slave jumper settings
• E. Proper orientation of the data cable

Answer: AE

NEW QUESTION 4
A user, ann logs in to her computer and receives an error that sates this IP address is already in use. All computer are assigned dynamic IP addresses .When following best practice, which of the following commands should the technician run? [select 2]

• A. Ipconfig
• B. Ipconfig/release
• C. Ipconfig/flusdns
• D. Ipconfig/renew
• E. Ipconfig/?
• F. Ipconfig/all

Answer: BD

NEW QUESTION 5
A customer needs to run several virtual machines on their design workstation to work on cross platform software. Which of the following should be maximized to improve workstation performance? (Select TWO)

• A. Cooling fans
• B. RAM
• C. Number of CPU cores
• D. Storage space
• E. PCIe slots

Answer: BC

NEW QUESTION 6
Which of the following RAM types is used if it is labeled as 4 GB PC1333?

• A. RAMBUS
• B. DDR3
• C. SDIMM
• D. SIM

Answer: B

NEW QUESTION 7
Which of the following devices utilizes VLANs to secure networks?

• A. Switch
• B. Router
• C. Firewall
• D. Modem

Answer: A

NEW QUESTION 8
A company asks a technician to recommend a solution to conserve paper without degrading print quality. Which of the following printer settings would BEST enable the technician to accomplish this request?

• A. Density
• B. Collate
• C. Duplex
• D. Color management

Answer: C

NEW QUESTION 9
A technician is building a custom gaming computer. Which of the following is the FASTEST memory the technician can use?

• A. DDR2 CAS7
• B. DDR3 CAS9
• C. DDR3 CAS10
• D. DDR3 CAS11

Answer: B

NEW QUESTION 10
Which of the following BEST describes the reason a network administrator would task a technician with replacing a hub with a switch?

• A. The hub did not provide PoE
• B. The hub had too many collisions
• C. The hub was out of ports
• D. The hub had a bad port

Answer: B

NEW QUESTION 11
A client has an issue with large files taking a long time to open or save. As time goes by, the issue worsens. The client has hundreds of GBs of files that are still in the process of backing up. The technician has verified that the hard drive is healthy and there are no signs of failure. Which of the following troubleshooting steps should the technician perform NEXT?

• A. Install the latest drivers from the hardware vendor.
• B. Perform a scan of the drive for file fragmentation.
• C. Run chkdsk on the workstation’s hard drive.
• D. Reformat the drive and reinstall the O

Answer: B

NEW QUESTION 12
A technician has been tasked with setting up email on a user’s phone. The user also wants the email to remain on the server. Which of the following ports would be BEST for setting up the phone?

• A. 80
• B. 110
• C. 143
• D. 443

Answer: C

NEW QUESTION 13
A customer wants a computer for performing a single-threaded task as quickly as possible. Which of the following CPU characteristics is the MOST important?

• A. Clock speed
• B. Hyperthreading
• C. Fan speed
• D. Number of cores

Answer: A

NEW QUESTION 14
A technician is replacing a drive that recently failed in a RAID configuration. However, After installing the new drive, the OS cannot access the RAID array. Which of the following should the technician perform NEXT?

• A. Update the firmware of the RAID controller.
• B. Rebuilt the RAID array.
• C. Install another hard drive.
• D. Format all drives to the same file system

Answer: A

NEW QUESTION 15
A company decides to deploy customer-facing, touch-scan kiosks. The kiosks appear to have several open service ports that could potentially become compromised. Which of the following is the MOST effective way to protocol the kiosks?

• A. Install an IDS to monitor all traffic to and from the kiosks.
• B. Install honeypots on the network to detect and analyze potential kiosk attacks before they occur.
• C. Enable switchport security on the ports to which the kiosks are connected to prevent network –level attacks.
• D. Create a new network segment with ACLs, limiting kiosks’ traffic with the internal networ

Answer: D

NEW QUESTION 16
Which of the following would be used to connect two remote sites?

• A. Switch
• B. Access point
• C. Router
• D. Hub

Answer: C

NEW QUESTION 17
A network administrator has a requirement to implement a WiFi hot-spot for the public. Which of the following should be used for secure access?

• A. WEP and TKIP
• B. WPA2 and AES
• C. WPA and static IPs
• D. WPA2 and MAC filtering

Answer: B