NEW QUESTION 1
With which network type will OSPF establish router adjacencies but not perform the DR/BDR election

• A. Point-to-point
• B. Backbone area 0
• C. Broadcast multi-access
• D. Non-broadcast multi-access

Answer: A

NEW QUESTION 2

Refer to the exhibit. Which two reasons for IP SLA tracking failure are true*? (Choose two)

• A. A route back lo the R1 LAN network is missing in R2
• B. The threshold value is wrong
• C. The destination must be 172 30 30 2 for icmp-echo
• D. The default route has wrong next hop IP address
• E. The source-interface is configured incorrectly

Answer: AE

NEW QUESTION 3
Which task must you perform to enable a point-to-point Frame Relay connection?

• A. Enable inverse ARP.
• B. Configure the encapsulation type.
• C. Configure static address mapping.
• D. Disable inverse ARP.

Answer: C

NEW QUESTION 4
Which two steps must you perform to allow access to a device when the connection to a remote TACACS+ authentication server fails? (Choose two)

• A. include the local keyword in the AAA configuration
• B. Configure accounting to reference the log of previously authenticated connections
• C. Configure the device to accept Telnet and SSH connections.
• D. Remove the aaa new model command from the global configuration
• E. Configure a local username and password on the device

Answer: BE

NEW QUESTION 5
Which option is a perquisite for stateful NAT64?

• A. application layer gateway
• B. ICMP64
• C. DNS64
• D. IPsec for IPv6

Answer: C

NEW QUESTION 6
Which statement is true about EBGP?

• A. An internal routing protocol can be used to reach an EBGP neighbor.
• B. The next hop does not change when BGP updates are exchanged between EBGP neighbors.
• C. A static route can be used to form an adjacency between neighbors.
• D. EBGP requires a full mesh.

Answer: C

NEW QUESTION 7
You have been asked to evaluate how EIGRP is functioning in a customer network.







What is the advertised distance for the 192.168.46.0 network on R1?

• A. 333056
• B. 1938688
• C. 1810944
• D. 307456

Answer: A

NEW QUESTION 8
Which action is the most efficient way to handle route feedback when connecting a RIPv2 network to OSPF?

• A. Implement distribute lists
• B. Implement route tags
• C. Implement route maps with access lists
• D. Implement IP prefix lists.

Answer: C

NEW QUESTION 9
Under which circumstance can TCP starvation occur?

• A. when DNS and TFTP traffic are transmitted on the same link
• B. when TCP traffic is blocked by an ACL
• C. when UDP traffic is processed in a policy-map before TCP traffic
• D. when Http and Https traffic are transmitted on the same link
• E. when TCP and UDP traffic are mixed in the same class of service

Answer: E

NEW QUESTION 10
Which NAT command do you enter to disable dynamic ARP learning on an interface?

• A. R1(config-if)#ip nat enable
• B. R1(config-if)#ip nat inside
• C. R1(config)#ip nat service
• D. R1(config-if)#ip nat outside
• E. R1(config)#ip nat allow-static-host

Answer: E

NEW QUESTION 11
Refer to the exhibit.

Network users on the 10.1.2.0/24 subnet have a default gateway of 10.1.2.254. Which command will configure this gateway?

• A. router(config)#ip route vrf RED 0 0.0 0 0 0.0.0 10.1.2.254
• B. router(config)#ip route 0.0.0.0 0.0.0.0 10.1.2.254
• C. router(config)#ip route 0.0.0 0 0.0.0.0 fastethernet0/1
• D. router(config)#ip route vrf BLUE 0.0.0.0 0.0.0.0 10.1.2.254

Answer: D

NEW QUESTION 12
Refer to the exhibit.

A user calls from another branch office with a request to establish a simple VPN tunnel to test a new router's tunneling capability. Based on the configuration in the exhibit, which type of tunnel was configured?

• A. IPsec site-to -site
• B. 6to4
• C. PPTP
• D. EZVPN

Answer: B

NEW QUESTION 13
What does SNMP v2c use for authentication?

• A. community string
• B. hash algorithm
• C. SSL certificate
• D. username and password

Answer: A

NEW QUESTION 14
Drag and drop the DMVPN components from the left onto the correct descriptions on the right
Select and Place:

Answer:

Explanation:

NEW QUESTION 15
What from the following can cause an issue for URPF? (this could be single answer or multiple choice) URPF FAIL
Reasons why urpf may fail:

• A. Asymmetric routing
• B. Cef not enabled
• C. Urpf not applied to the traffic source
• D. If it is used as ingress filtering

Answer: A

NEW QUESTION 16
A router was configured with the EIRGP stub command. The router advertises which types of routes?

• A. static and summary
• B. connected, static, and summary
• C. connected and static
• D. connected and summary

Answer: D

NEW QUESTION 17
Which IP SLA operation can be used to simulate voice traffic on a network? CP connect

Answer:

NEW QUESTION 18
Which three functionalities are specific to stateful NAT64? (Choose three.)

• A. It conserves IPv4 addresses.
• B. It requires IPv4-translatable IPv6 addresses.
• C. No constraint is put on the number of endpoints due to 1:N translation.
• D. It helps ensure end-to-end address transparency and scalability.
• E. A state or bindings are created on every unique translation.
• F. It requires either manual or DHCPv6-based address assignment for IPv6 hosts.

Answer: ACE

NEW QUESTION 19
Which two statements about the OSPF down bit are true? (Choose two)

• A. It is set only for LSA types 3,5. and 7
• B. It is set only for LSA types 1, 2 and 4
• C. It is set only when an OSPF virtual link is created
• D. It is set when MP-BGP routes are redistributed into OSPF
• E. It is set when OSPF routes are redistributed into BGP

Answer: AD

NEW QUESTION 20
A Network engineer wants a NTP Client to be able to update the local system without updating or synchronizing with the remote system. Which keyboard for the ntp access-grup command is needed to accomplish this?

• A. server
• B. peer
• C. query-only
• D. server-only

Answer: A