It is impossible to pass ASQ CSSBB exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed ASQ CSSBB practice questions. You will get a surprising result by our Latest Certified Six Sigma Black Belt practice guides.
Free demo questions for ASQ CSSBB Exam Dumps Below:
NEW QUESTION 1
A team wants a technique for improving consistency of assembly operations. They should use:
- A. written and diagrammed work instructions
- B. flow charts and process maps
- C. cause and effect diagrams
- D. Pareto chart
- E. relationship matrix
Answer: A
NEW QUESTION 2
There are 14 different defects that can occur on a completed time card. The payroll department collects 328 cards and finds a total of 87 defects. DPU =
- A. 87 ÷ 328
- B. 87 ÷ (328 × 14)
- C. 14 ÷ 87
- D. 87 ÷ 14
- E. 328 ÷ 87
- F. 87 × 1,000,000 ÷ (14 × 328)
Answer: A
NEW QUESTION 3
Deming called the technique of studying a sample to gain understanding of the distribution of a population an “enumerative study.” His main objection to these studies was:
- A. they are too difficult to perform correctly
- B. they require extensive use of computers
- C. they assume a stable distribution
- D. random samples are expensive to obtain
- E. these studies have a high probability of Type II error
Answer: C
NEW QUESTION 4
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 5?
A.
B.
C.
- A. none of the above
Answer: A
NEW QUESTION 5
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 2?
A.
B.
C.
- A. none of the above
Answer: B
NEW QUESTION 6
The primary metric for a project is reduced cost for process A . Baseline data might include:
- A. current maintenance costs
- B. current selling price for the products or services output by process A
- C. current suggestions from stakeholders of process A
- D. all the above
- E. none of the above
Answer: A
NEW QUESTION 7
For a line in an FMEA form a team has established the following: Cost: $82 Severity: 7 Occurrence: 9 Detection: 4 Target date: 7 days What should the risk priority number (RPN) be for this line:
- A. 144,648
- B. 252
- C. 1764
- D. 63
- E. none of the above
Answer: B
NEW QUESTION 8
A process shows the following number of defectives. Each sample size for this process is 85.3 8 2 7 7 6 8 8 9 5
What control chart should be used?
- A. x-bar and R
- B. median
- C. individual and moving range
- D. p
- E. np
- F. c
- G. u
- H. none of the above
Answer: E
NEW QUESTION 9
Find the value of (10) in the ANOVA table. Assume:
- A. 16.4
- B. 3.2
- C. 18.6
- D. 23.2
- E. 4.54
- F. 12.2
- G. 0.525
- H. 2.82
- I. 1.48
- J. 35.4
- K. 0.10<P<1
- L. 0.05<P<0.10
- M. 0.01<P<0.05
- N. 0.005<P<0.01
- O. 0<P<0.005
Answer: D
NEW QUESTION 10
Find Cpk
- A. 2.00
- B. 0.56
- C. 1.33
- D. 0.44
Answer: D
NEW QUESTION 11
An x-bar and R chart is used to monitor a process. One week ago a new type of raw material was introduced and since that time 60 points have been plotted on the xbar chart and all are in the middle third of the chart. The corresponding 60 points on the R chart are all below the average range. This indicates that:
- A. the operator has been plotting the points incorrectly
- B. it is time to recalibrate the gage used
- C. it is time to recalculate the control limits
- D. the material manager should be asked to go back to the previous raw material so thecharts will more accurately reflect the process
Answer: C
NEW QUESTION 12
The word takt is closest to the theory of constraints word:
- A. drum
- B. buffer
- C. rope
- D. constraint
Answer: A
NEW QUESTION 13
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 14?
A.
B.
C.
- A. none of the above
Answer: D
NEW QUESTION 14
If the value of the test statistic had been 7.03, what action should have been taken regarding the null hypothesis?
- A. rejected
- B. accepted
- C. not rejected
- D. none of the above
Answer: A
NEW QUESTION 15
A newspaper article describes a high positive correlation between obesity and orange juice consumption among six-year-olds. Parents who restrict the use of orange juice for their children have:
- A. made a type I error
- B. made a type II error
- C. misunderstood margin of error
- D. confused correlation with causation
Answer: D
NEW QUESTION 16
This QFD matrix was used in the design process for a ball point pen. What symbol is appropriate for the square labeled 6?
A.
B.
C.
- A. none of the above
Answer: B
NEW QUESTION 17
A _____ from a sample is used to estimate a population ______. The two words that best fill these blanks are:
- A. item, value
- B. value, statistic
- C. statistic, parameter
- D. parameter, value
- E. parameter, statistic
Answer: C
NEW QUESTION 18
Find the mean, median and mode of the following data set: 9, 11, 12, 12, 14, 18, 18, 18, 20, 23:
- A. 15.5, 18, 18
- B. 15, 14, 18
- C. 14, 16, 18
- D. 15, 12, 18
- E. 15.5, 16, 18
Answer: E
NEW QUESTION 19
The operators of a manufacturing cell work out a more orderly arrangement for tool storage and establish a schedule to maintain cleanliness on a daily basis. These improvements are best described by which approach to problem solving?
- A. 5S
- B. Poka yoke
- C. Kaizen
- D. PDCA
- E. Re-engineering
Answer: A
NEW QUESTION 20
An x-bar and R chart has four part measurements per sample The control limits on the averages chart are 2.996 and 3.256. Assume the process data form a normal distribution.What is the probability that the next plotted point falls outside the control limits?
- A. 0.00135
- B. 0.0027
- C. 0.0054
- D. none of the above
Answer: B
NEW QUESTION 21
If it is desirable to maximize the response R, the following levels should be used:
- A. A+ and B+
- B. A+ and B–
- C. A– and B+
- D. A– and B–
- E. none of the above
Answer: A
NEW QUESTION 22
When comparing two vendors’ machines it is found that a sample of 1000 parts from machine A has 23 defectives and a sample of 1300 parts from machine B has 36 defectives. Do the data indicate that machine B has a higher rate of defectives?
- A. yes
- B. no
- C. all of the above
Answer: A
NEW QUESTION 23
An experiment has seven factors with two levels each. The experiment has eight runs. This experimental design is called:
- A. full factorial design
- B. half fractional factorial design
- C. interaction
- D. none of the above
Answer: D
NEW QUESTION 24
Find the value of (2) in the ANOVA table. Assume:
- A. 16.4
- B. 3.2
- C. 18.6
- D. 23.2
- E. 4.54
- F. 12.2
- G. 0.525
- H. 2.82
- I. 1.48
- J. 35.4
- K. 0.10<P<1
- L. 0.05<P<0.10
- M. 0.01<P<0.05
- N. 0.005<P<0.01
- O. 0<P<0.005
Answer: H
NEW QUESTION 25
The test statistic is approximately:
- A. 4.79
- B. 6.71
- C. 2.08
- D. 5.44
Answer: A
NEW QUESTION 26
In a series of linked processes and associated feedback loops the product or service flows _____ and the information flows _____ .
- A. rapidly, slower
- B. downstream, upstream
- C. evenly, digitally
- D. sooner, later
- E. to the customer, from the supplier
- F. none of the above
Answer: B
NEW QUESTION 27
This table displays the inventory of fasteners in a storage cabinet. An item is selected at random from the fastener cabinet. Find the approximate probability it is size 3/4.
- A. .85
- B. .185
- C. .03
- D. .11
- E. none of the above
Answer: D
NEW QUESTION 28
......
100% Valid and Newest Version CSSBB Questions & Answers shared by Dumps-files.com, Get Full Dumps HERE: https://www.dumps-files.com/files/CSSBB/ (New 227 Q&As)