We provide real JN0-648 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Juniper JN0-648 Exam quickly & easily. The JN0-648 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Juniper JN0-648 dumps pdf and vce product and material, you can easily pass the JN0-648 exam.
Check JN0-648 free dumps before getting the full version:
NEW QUESTION 1
Exhibit.
Your IS-IS adjacency is not established as shown in the exhibit. What is the problem?
- A. There is an invalid IPv6 router ID
- B. There is an MTU mismatch
- C. There is an invalid IPv4 router ID
- D. There is an area mismatch
Answer: D
NEW QUESTION 2
You are redistributing static routes into an OSPF area. Which two statement are true is this scenario? (Choose two.)
- A. The external route advertisements have a domain scope.
- B. The area must be stub area.
- C. The area must be the backbone area.
- D. The routes can be advertised in type 7 LSAs.
Answer: CD
NEW QUESTION 3
You want to view the VLANs that have been created dynamically using MVRP. Which operational mode command will display this information?
- A. Show mvrp dynamic-vlan memberships
- B. Show mvrp interface
- C. Show mvrp registration-state
- D. Show mvrp applicant-state
Answer: A
NEW QUESTION 4
Exhibit.
Referring to the exhibit, which two statements are true with regards to deploying CoS? (Choose two.)
- A. You should apply BA classifiers on the point-to point interfaces of the routers.
- B. You should apply MF classifiers on the LAN-facing interfaces of the routers
- C. You should apply BA classifiers on the LAN-facing interfaces of the routers
- D. You should apply MF classifiers on the point-to-point interfaces of the routers
Answer: AB
NEW QUESTION 5
You have configured class mode power management on an EX4300 to provide PoE power to telephone and security camera equipment. You want to ensure that security camera power takes priority over telephone power.
Which two actions would solve this problem? (Choose two.)
- A. Connect the security cameras to the lowest port numbers on the switch.
- B. Set the power priority to high on ports connected to security cameras.
- C. Set the maximum power settings on ports connected to security cameras.
- D. Set the power priority to low on ports connected to security cameras.
Answer: AB
NEW QUESTION 6
What is the correct authentication processing order on EX Series switches when multiple Layer 2 authentication methods are enabled?
- A. captive portal-> MAC RADIUS -> 802.1x
- B. 802.1x-> captive portal -> MAC RADIUS
- C. MAC RADIUS -> 1x -> captive portal
- D. 802.1x -> MAC RADIUS -> captive portal
Answer: D
NEW QUESTION 7
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Only 802. 1X authentication will be used for devices connecting to ge-0/0/15
- B. The current device is authenticated using MAC RADIUS
- C. Additional users will automatically be allowed to connect to ge-0/0/15
- D. The current device was allowed after authentication attempts to the RADIUS server failed
Answer: D
NEW QUESTION 8
You are deploying PIM source-specific multicast (SSM) for a new multicast messaging service. You have configured the multicast source to use 235.44.123.100 as the multicast address. You are not able to join the PIM SSM multicast feed.
Which two solutions would resolve this problem? (Choose two.)
- A. Reconfigure the multicast source to use an address in the range of 224.0.0.0 through 224.255.255.255.
- B. Reconfigure the multicast source to use an address in the range of 232.0.0.0 through 232.255.255.255.
- C. Add the multicast address to the [edit routing-options multicast ssm-map] stanza.
- D. Add the multicast address to the [edit routing-options multicast ssm-groups] stanza.
Answer: BD
NEW QUESTION 9
Exhibit.
You are implementing CoS for a custom application that is labeling its packets with DSCP code-point 101111. You have applied the configuration shown in the exhibit, but not that while some custom application traffic ingressin on ge-0/0/1 transits the SRX Series device successfully, packets ingressing all other ge-* interfaces are being dropped.
Which action should you take to solve this problem?
- A. Configure a scheduler and scheduler map for expedited-forwarding and apply to all interfaces.
- B. Modify the BA classifier to assign code point 101111 to loss priority low.
- C. Remove the BA classifier from all ge-interfaces.
- D. Apply the rate-limit-ef policer to all ge-interfaces.
Answer: D
NEW QUESTION 10
Exhibit.
You are authenticating user devices connected to your ex Series switch. You have 802.1X and MAC RADIUS configured for all ports A user is complaining about the time it takes to connect their non-802.1X device on ge-0/0/15 using MAC RADIUS authentication
Referring to the exhibit, what should be done to accelerate the authentication process?
- A. Change the supplicant mode to multiple on ge-0/0/15
- B. Configure the no-reauthentication feature for 802.1X on ge-0/0/15
- C. Configure the restrict feature for MAC RADIUS on ge-0/0/15.
- D. Change the 802.1X retry attempts value to 5 on ge-0/0/15
Answer: A
NEW QUESTION 11
Exhibit.
Referring to the exhibit, which two statements are true regarding Q-in-Q tunneling? {Choose two)
- A. The C-VLAN traffic will be encapsulated with an outer VLAN tag of 10.
- B. The C-VLANs 100-200 will be sent as the inner VLAN tag
- C. The C-VLAN 150 will be sent as the inner VLAN tag
- D. The C-VLAN traffic will be encapsulated with an outer VLAN lag of 150
Answer: AB
NEW QUESTION 12
Exhibit.
Referring to the exhibit, a RMSM network is set up to enable communication between multicast devices. Which statement is true in this scenario?
- A. After the formation of the shortest-path tree, a join message is sent from R2 to R1.
- B. After the formation of the shortest-path tree, a join message is sent from R1 to R5
- C. After the formation of the shortest-path tree, a prune message is sent from R1 to R2.
- D. After the formation of the shortest-path free, a prune message is sent from R1 to R5.
Answer: C
NEW QUESTION 13
You are designing a multicast topology to support IPv4 IPTV broadcasts in your organization. The design should support multiple multicast senders with overlapping group addresses while preventing interference between them. Client devices currently do not support IGMPv3.
Which approach would fulfill these requirements?
- A. Implement PIM-SM and SSM with SSM maps to support IGMPv2 clients
- B. Implement bidirectional PIM
- C. Assign group addresses in the 224/4 range and implement PIM-DM
- D. Implement MLD
Answer: C
NEW QUESTION 14
You are enabling MSTP in your Layer 2 network to prevent loops.
In this scenario, which three parameters must match on all switches in the network? (Choose three. )
- A. configuration name
- B. bridge priority
- C. MSTI-to-VLAN mapping
- D. max age
- E. revision level
Answer: ACE
NEW QUESTION 15
You are deploying IP phones to a customer site. The IP phones will be installed to share a common access port with the user's desktop computer. You are required to provide a mechanism to place user data traffic and voice traffic in different VLANs for class-service application
How would you implement this solution?
- A. Configure flexible VLAN tagging on the user ports with the data and voice VLANs as members
- B. Apply a multifield classifier on the access ports that assigns voice packets to the assured forwarding class, based on the IP phone manufacturer's MAC QUI
- C. Configure the IP phones to label voice traffic with the DSCP of code point and apply a BA classifier to the access ports to classify voce traffic
- D. Configure VLAN tagging on the IP phones and use the voice VLAN feature on the access ports to assign lagged frames to the voice VLAN and untagged frames to a data VLAN
Answer: D
NEW QUESTION 16
Click the Exhibit button.
You have configured MSTP in your Layer 2 network. You are having problems with it establishing correctly. Referring to the exhibit, what is causing the problem?
- A. You must assign a context ID number other than zero
- B. The MSTI-to-VLAN mapping does not match
- C. The region name is not correct
- D. The revision number is the same on both devices
Answer: B
NEW QUESTION 17
which protocol is a multicast routing protocol?
- A. OSPF
- B. BGP
- C. PIM
- D. IS-IS
Answer: C
NEW QUESTION 18
Exhibit.
Referring to the configuration shown in the exhibit, how many of the routes received from 10.0.0.2 will be active in the routing table?
- A. 2
- B. 8
- C. 3
- D. 5
Answer: C
NEW QUESTION 19
Click the Exhibit button.
traffic to the best-effort queue and traffic from 192.168.20.0/24 to the expedited forwarding queue. You received notice that some applications are not working after the change.
Which configuration change will remedy the problem?
- A. [edit firewall family inet filter ingress User@host # set term 3 then accept
- B. [edit firewall family inet filter ingress User@host # set term 3 then next
- C. [edit firewall family inet filter ingress User@host # set term 2 from protocol tcp
- D. [edit firewall family inet filter ingress User@host # set term 2 from service-filter hit
Answer: A
NEW QUESTION 20
Exhibit.
You are configuring, the PVLAN feature on your switches. The PVLAN will span the two EX Series switches shown in the exhibit
Which three configuration parameters must be enabled on the ports connecting the two switches? (Choose three. )
- A. family inet
- B. interface-mode access
- C. interface-mode trunk
- D. family Ethernet-switching
- E. inter-switch-link
Answer: CDE
NEW QUESTION 21
In IS-IS advertising POUs with the overload bit has which effect?
- A. The local device will no longer be used for transit traffic
- B. The local device's POUs are marked with a metric of 65535
- C. The ISIS adjacencies become passive
- D. The IS-IS adjacencies enter the "new" state
Answer: A
NEW QUESTION 22
Click the Exhibit button.
You are investigating reports of increased latency and discover that some routes cause customer traffic to traverse a route reflector instead of the optimal path.
Referring to the exhibit, which configuration statement would solve the problem?
- A. delete protocols bgp group BGP-MESH peer-as
- B. set policy-options policy-statement NHS term BGP_ROUTES from external
- C. set protocols bgp group BGP-MESH import NHS
- D. delete protocols bgp group BGP-MESH export NHS
Answer: B
NEW QUESTION 23
......
Recommend!! Get the Full JN0-648 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/JN0-648-dumps.html (New 89 Q&As Version)