NEW QUESTION 1
A customer configured CIFS in an ONTAP 9.5 SVM. The customer wants to verify if the “CIFS Server” is accessible from each node of the cluster.
In this scenario, which command will accomplish this task?

• A. vserver cifs session
• B. vserver cifs connection show
• C. vserver cifs check
• D. vserver cifs domain discovered-servers

Answer: C

NEW QUESTION 2
Which two performance threshold policies in OnCommand Unified manager are configurable? (Choose two.)

• A. user-defined
• B. volume
• C. system-defined
• D. dynamic

Answer: CD

NEW QUESTION 3
Which command enables ONTAP storage failover?

• A. storage failover modify -enabled false -node nodename
• B. storage failover modify –enabled true –node nodename
• C. cluster ha modify -configured false
• D. storage failover modify –mode ha -node nodename

Answer: B

NEW QUESTION 4
How would you protect a NAS SVM root volume?

• A. Create a SnapMirror copy of the root volume to a peer cluster.
• B. Create load-sharing mirrors.
• C. Create a backup the SVM configuration.
• D. Create a backup of the SVM root volume.

Answer: B

NEW QUESTION 5
An administrator notices that the applications are running slowly. The administrator wants to determine which component on the ONTAP subsystem is experiencing the most latency.
In this scenario, which command would you use to accomplish this task?

• A. run -node * stats show system::sys_avg_latency
• B. statistics system show
• C. run -node * -command sysstat -x 1
• D. qos statistics latency show

Answer: D

NEW QUESTION 6
You need to move a FlexVol volume from one SVM to another. In this situation, which command would accomplish this task?

• A. volume create
• B. volume rehost
• C. volume modify
• D. volume move

Answer: B

NEW QUESTION 7
A customer has four or more nodes in a cluster. More than four target ports are being used by the SVMs in any node. The customer wants to limit the number of paths that can be used to access LUNs on the nodes, so that the paths do not exceed the recommended maximum of eight.
In this scenario, which three actions will accomplish this task? (Choose three.)

• A. Use ALUA protocol.
• B. Use multipathing software.
• C. Use port sets for iSCSI.
• D. Use Selective LUN Mapping
• E. Use FC switch zoning.

Answer: CDE

NEW QUESTION 8
Which three actions would be used to upload an image or firmware for ONTAP 9.3? (Choose three.)

• A. Use TFTP.
• B. Use USB.
• C. Use HTTP.
• D. Use FTP.
• E. Use SFTP.

Answer: BCD

NEW QUESTION 9
What are three reasons to implement FabricPool? (Choose three.)

• A. to shrink secondary storage
• B. to implement storage efficiency features
• C. to move volumes to external capacity tiers
• D. to use the volume backup feature
• E. to reclaim space on primary storage

Answer: ABE

NEW QUESTION 10
Click the Exhibit button.

You execute the cluster1::> network ipspace show command, and notice that two IPspaces are not able to be renamed or deleted.
Referring to the exhibit, what are these two IPspaces? (Choose two.)

• A. IPspace1
• B. Default
• C. IPspace2
• D. Cluster

Answer: BD

NEW QUESTION 11
Which two statements are true for mailbox disks per node in an HA pair? (Choose two.)

• A. Six disks are required if the root volume is on a mirrored aggregate.
• B. Two disks are required if the root volume is on a disk shelf.
• C. Four disks are required if the root volume is on a mirrored aggregate.
• D. Eight disks are required if the root volume is on partitioned disks.
• E. One array LUN is required if the root volume is on a storage array.

Answer: BE

NEW QUESTION 12
A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed.
In this scenario, how many additional nodes are supported?

• A. 3
• B. 6
• C. 4
• D. 1

Answer: D

NEW QUESTION 13
To which three objects on an ONTAP 9.3 cluster would you assign a QoS throughput floor? (Choose three.)

• A. a volume on FAS
• B. a LUN on AFF
• C. a volume on AFF
• D. an SVM on AFF
• E. a file on AFF

Answer: BCE

NEW QUESTION 14
You are running a FAS8200 system with ONTAP 9.5 with a Flash Pool aggregate. You have an SVM root volume and two volumes (Vol1 and Vol2).
In this scenario, which two catching technologies would be applied to which volumes? (Choose two.)

• A. Flash Pool can be applied to all volumes including the SVM root volume.
• B. FlashCache can be applied to all volumes including the SVM root volume.
• C. Flash Pool can be applied to all volumes except the SVM root volume.
• D. FlashCache can be applied to all volumes except the SVM root volume.

Answer: AB

NEW QUESTION 15
An administrator created, a NAS storage virtual machine for a vSphere environment. The administrator verified that all interfaces can communicate successfully. However, when the administrator attempts to mount the export, a connection refuse message is received.
Based on this scenario, what would you troubleshoot?

• A. the igroup
• B. the CIFS eport policy
• C. the NFS export policy
• D. the FC zoning policy

Answer: C

NEW QUESTION 16
An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering. In this scenario, what are three requirements to accomplish this task? (Choose three.)

• A. volume with space-guarantee none
• B. FabricPool license
• C. intercluster LIFs
• D. volume with space-guarantee volume
• E. AFF array

Answer: BCE

NEW QUESTION 17
What is the purpose of Epsilon?

• A. to monitor cluster health
• B. to be used as a load-balancer for a 2-node cluster
• C. to evaluate the differences in node configurations
• D. to be used as a tie-breaker for a cluster quorum

Answer: D

NEW QUESTION 18
If an SVM is renamed and it is participating in an intercluster SVM peer relationship, what is the result?

• A. SVM peers are removed and they need to be re-created.
• B. Snapshot copies are renamed with the new SVM unique identifier.
• C. SnapMirror relationships appear as broken and a resync is required.
• D. Remote clusters are updated with the new peer SVM name.

Answer: A

NEW QUESTION 19
Click the Exhibit button.

You have a FAS8200 HA pair with disks that are evenly split between nodes A and B. When a disk fails, the replacement disk must automatically assign back to the originally assigned controller, A or B.
Referring to the exhibit, which disk auto assign policy satisfies this requirement?

• A. shelf
• B. stack
• C. default
• D. bay

Answer: A

NEW QUESTION 20
Two 100 GB space-reserved LUNs and one 100 GB non-space-reserved LUN were created in System Manager in a 1 TB volume.
In this scenario, how much space has been allocated for writes to the three LUNs?

• A. 1 TB
• B. 300 GB
• C. 100 GB
• D. 200 GB

Answer: D

NEW QUESTION 21
......