NEW QUESTION 1
Refer to the exhibit and configuration output.

What are the two main ways from New York to call Extension 6001 in England? (Choose two.)
sh run | s Dial-peer dial-peer voice 2 voip destination-pattern 6… preference 0
session-target ipv4: 200.10.10.5
dtmf-relay sip-notify dial-peer voice 3 pots destination-pattern 6…
preference 1 port 0/0/0:23 prefix 757385
dtmf-relay sip-notify

• A. The first way is WAN.
• B. The first way is PSTN.
• C. The second way is WAN.
• D. The second way is PSTN.

Answer: AD

NEW QUESTION 2
When CUCM is configured with a route pattern, translation transformation, which is matched first when a user dials 914085551212?

• A. route pattern
• B. translation pattern
• C. called-party transformation
• D. calling-party transformation

Answer: B

Explanation: Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b03txpat.htm l
Route pattern is used to route calls to external entities. The calling and called party numbers resulting from the digit transformations configured in the route pattern and/or route lists are then processed by any Transformation Patterns configured for the devices contained in the chosen Route Group.

NEW QUESTION 3
An engineer is setting up a system with voice and video endpoints using auto-QoS policy on the switches. Which DSCP values are expected for interactive voice and video?

• A. F and AF-41
• B. EF and CS6
• C. EF and CS3
• D. EF and AF21

Answer: A

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/QoSIntro.html

NEW QUESTION 4
An IP phone user has dialed "15152421234". Which route pattern will be used?

• A. 1515[^0-1]4[123]+
• B. 1515[^0-2]4[01234]
• C. 1515[^0-1]42[1234]
• D. 1515[^0-1]421[1-4]+

Answer: D

NEW QUESTION 5
Which of these media resources can be configured in Cisco Unified Communication manager?
(Choose Three)

• A. MOH Server
• B. Voice Termination Point DSP
• C. Transcoder
• D. Auto Attendant
• E. Conference Bridge

Answer: ACE

NEW QUESTION 6
Refer to Exhibit:

If the user at extension 1001 dials the user at extension 2001, which dial peer is used to route the call?

• A. 3
• B. 2
• C. 4
• D. 1

Answer: C

NEW QUESTION 7
A Cisco Unified Communications Manager group specifies a prioritized list of how many Cisco Unified Communications Managers?

• A. 1
• B. 2
• C. 3
• D. 4
• E. 5
• F. 6
• G. 7

Answer: D

NEW QUESTION 8
Which three steps must you take on Cisco Unified Communications Manager to configure Cisco TelePresence Conductor for ad hoc and rendezvous conferences? (Choose three.)

• A. Verify the location configuration.
• B. Verify the certificate trusts.
• C. Configure one ICT trunk to TelePresence Conductor.
• D. Configure one SIP trunk to TelePresence Conductor.
• E. Configure two ICT trunks to TelePresence Conductor.
• F. Configure two SIP trunks to TelePresence Conductor.

Answer: ABF

NEW QUESTION 9
Which command is used to enter the DSP farm profile configuration mode?

• A. dspfarm-profile 100 transcode
• B. dspfarmprofile 100 transcode
• C. dspfarm profile 100 transcode
• D. dspfarm 100 profile transcode

Answer: C

NEW QUESTION 10
Refer to the exhibit and configuration output.

A user in New York (5001) is trying to call a user in London (6001), but the call cannot be completed. Assuming that the WAN uplink is failing and the voice traffic has to go out toward the PSTN, which command do you need to add to dial peer to solve this issue?
dial-peer voice 3 pots destination-pattern 6… preference 1
port 0/0/0:23
dtmf-relay sip-notify

• A. num-exp 512602 6001
• B. prefix 757385
• C. forward-digits 2
• D. forward-digits 4
• E. prefix 5126

Answer: B

NEW QUESTION 11
Which Cisco Unified Communications Manager default global conference setting should be changed to ensure fraud prevention?

• A. Advanced Ad Hoc Conference Enabled
• B. Enable Click-to-Conference for Third-Party Applications
• C. Drop Ad Hoc Conference
• D. Block OffNet to OnNet Transfer
• E. MCU Conference Bridge Custom Layout Index

Answer: C

Explanation: Cisco Unified Communications Manager Administration provides the clusterwide service parameter, Drop Ad Hoc Conference, to allow the prevention of toll fraud (where an internal conference controller disconnects from the conference while outside callers remain connected). The service parameter settings specify conditions under which an ad hoc conference gets dropped.
Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/accm-861cm/a05confb.html

NEW QUESTION 12
What are the characteristics of a Cisco Unified Communications Manager group?

• A. Each call-processing server can be assigned to a single Cisco Unified Communications Manager group.
• B. A Cisco Unified Communications Manager group is a prioritized list of (one or more) callprocessing and application servers.
• C. Each device has to have a Cisco Unified Communications Manager group assigned, which will determine the primary and backup servers to which it can register.
• D. A single Cisco Unified Communications Manager group can exist in a single cluster.

Answer: B

NEW QUESTION 13
Route lists determine the order of preference for route group usage. If a route list is configured, what is the minimum number of route groups that you must configure?

• A. 1
• B. 2
• C. 3
• D. 4
• E. 5
• F. 6
• G. 7
• H. 8

Answer: A

NEW QUESTION 14
You have two groups of managers that need to hold Meet-Me conferences. You want each group to have access to a range of 10 Meet-Me numbers. What are the two best ways to accomplish this? (Choose two.)

• A. Create two different partitions and add both groups of 10 Meet-Me conference numbers to the partitions.
• B. Ensure that the 10 Meet-Me conference numbers overlap with existing ad hoc conferencing numbers.
• C. Create two different groups of Meet-Me conference numbers, add them to the partition, and add the partition to the two manager groups to provide limited access.
• D. Create a different partition for each group of managers and assign a set of 10 Meet-Me conference numbers to each.
• E. Create two groups of 10 Meet-Me conference numbers that do not overlap with any other number in the numbering plan.

Answer: CE

NEW QUESTION 15
Refer to the exhibit. What should be entered in the Name field when configuring Cisco Unified Communications Manager to control voice port T1 1/0/0 in BR2 GW?

• A. S0/DS1-0@BR2_GW
• B. BR2_GW
• C. 10.2.120.1
• D. S0/DS1@SDA0012005FEEF0

Answer: B

NEW QUESTION 16
Which statement about translation patterns and transformation patterns is true?

• A. Both transformation patterns and translation patterns support only numeric values.
• B. Translation patterns support numeric and alphanumeric values, whereas transformation patterns support only numeric values.
• C. Transformation patterns support numeric and alphanumeric values, whereas translation patterns support only numeric values.
• D. Both transformation patterns and translation patterns support numeric and alphanumeric values.

Answer: D