NEW QUESTION 1
Which of these determines the Cisco Unified Communications Manager server to which an IP phone registers?

• A. The Cisco Unified Communications Manager group is configured with a Device Pool that designates the primary, secondary, and tertiary servers in the group.
• B. Each IP phone is configured with a Device Pool containing the Cisco Unified Communications Manager group that determines which server the IP phone will use as its primary, secondary, and tertiary server.
• C. Each IP phone is configured with its primary, secondary, and tertiary server.
• D. The Cisco Unified Communications Manager group is configured in the publisher to designate the IP phone groups that will register with the primary, secondary, and tertiary servers in the group.

Answer: B

NEW QUESTION 2
What is the difference between policing and shaping?

• A. Policing: Transmit and mark, then transmit the packet
• B. Shaping: Buffer the exceeding packets.
• C. Policing: Transmit the packet
• D. Shaping: Buffer the exceeding packets.
• E. Policing: Transmit, drop or mark, then transmit the packet
• F. Shaping: Buffer the exceeding packets.
• G. Policing: Buffer the exceeding packet
• H. Shaping: Transmit and mark, then transmit the packets.

Answer: C

NEW QUESTION 3
A customer is integrating two video solutions between regions using a Cisco Unified Border Element and finds that some of the RTP payloads are not compatible with the Cisco Unified
Border Element configuration. Which two actions does Cisco recommend to solve this issue? (Choose two.)

• A. Specify the video payload on the voice service.
• B. Configure a transparent codec on the dial peers.
• C. Configure RTP payload mapping on the dial peers.
• D. Configure asymmetric payload on the voice service.
• E. Set up a voice class for the video codec.

Answer: AC

NEW QUESTION 4
Which two codecs are the best codecs to use in WAN and LAN? (Choose two.)

• A. WAN codec G.711
• B. LAN codec G.729
• C. WAN codec G.729
• D. LAN codec G.711

Answer: CD

NEW QUESTION 5
Refer to the exhibit.

To reach an external number, a user first dials a 9. Which route pattern will be matched if a user dials the toll-free number 18005550123?

• A. 911
• B. 9.[2-9]XXXXXX
• C. 9.1[2-9]XX[2-9]XXXXXX
• D. 9.18[0,6-8][0,6-8]XXXXXXX
• E. 9.1900XXXXXXX
• F. 9011!

Answer: D

NEW QUESTION 6
When dialing 1234, which rule is matched first?

• A. route pattern 1XXX
• B. route pattern 12[123]X
• C. translation pattern 12[123]X
• D. translation pattern 1XXX
• E. directory number 12345

Answer: C

NEW QUESTION 7
Callers inform you that they hear a second dial tone after dialing the number 4085550123. Which dial-peer configuration command resolves this issue?

• A. answer-address 408555....
• B. destination-pattern 91[2-9]..[2-9].....
• C. forward-digits all
• D. direct-inward-dial

Answer: D

NEW QUESTION 8
Which three options are valid digit discard instructions?

• A. PreAt.
• B. PreDot.
• C. Leading#.
• D. PostAt.
• E. Trailing#.
• F. PostDot.

Answer: ABE

NEW QUESTION 9
Which tool can you use to evaluate dial plans for errors and to examine internal-to-internal and internal-to-external calls?

• A. RTMT
• B. DNA
• C. QRT Viewer
• D. CAR tool

Answer: B

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/9_1_1/CUCM_BK_C514A4AE_00_cucm-dialed-number-analyzer-91/CUCM_BK_C514A4AE_00_cucm-dialed-number-analyzer-91_chapter_01.html

NEW QUESTION 10
Which parameter is required on MCU for ad hoc conferencing?

• A. Media Port reservation
• B. incoming calls to unknown conferences or auto-attendants
• C. DSP reservation for video
• D. MCU type
• E. MCU Conference Bridge SIP Port

Answer: A

NEW QUESTION 11
Which CUCM default global conference setting should be changed to ensure fraud prevention?

• A. Advanced Ad Hoc Conference Enabled.
• B. Block OffNet to OnNet Transfer.
• C. MCU Conference Bridge Custom Layout Index.
• D. Drop Ad Hoc Conference.
• E. Enable Click-to-Conference for Third-Party Applications.

Answer: D

NEW QUESTION 12
On what equipment do you configure Layer 2 to Layer 3 QoS mapping?

• A. switch
• B. router
• C. firewall
• D. Cisco Unified Communications Manager
• E. bridge

Answer: A

Explanation: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sg/configuration/guide/conf/qos.html

NEW QUESTION 13
Refer to the exhibit. Bob has set his phone to forward calls to extension 5000. When a call is placed to extension 2000, which phone will ring?

• A. Phone A
• B. Phone B
• C. Phone C
• D. Phone D

Answer: B

NEW QUESTION 14
Which tool can you use to verify and troubleshoot a dial plan?

• A. Audit Log Configuration
• B. Dialed Number Analyzer
• C. CDR Analysis and Reporting
• D. Troubleshooting Trace Settings

Answer: B

NEW QUESTION 15
Which Cisco Unified Communications Manager menu path is used to access the softkey template configuration window?

• A. Device > Device Settings > Softkey Templates
• B. Device Settings > Softkey Templates
• C. IP Phone > Template > Softkey
• D. Device > IP Phone > Template > Softkey

Answer: A

NEW QUESTION 16
You are a Voice Engineer at ABC Company. You want to implement a voice translation profile to perform the following manipulation: The incoming DNIS 9876562XXX should be modified to 2XXX. Which four commands are required to configure the translation profile? (Choose four.)

• A. voice translation-rule 1
• B. rule 1 /^ 9876562/ /2/
• C. voice translation-profile incoming-calls
• D. translate called 1
• E. rule 1 /^ 9876562$/ /2/ type subscriber
• F. translation-profile incoming incoming-calls
• G. translate calling 1
• H. translate called rule 1

Answer: ABCD