NEW QUESTION 1
Where do you configure a SIP route pattern?

• A. Call Routing > Route/Hunt > SIP Route Pattern
• B. System > SIP Route Pattern
• C. Call Routing > SIP Route Pattern
• D. Advanced Features > SIP Route Pattern

Answer: C

NEW QUESTION 2
In a centralized call-processing solution, there are five sites connected through an IP WAN. To optimize the utilization of the IP WAN, CAC needs to be implemented.
How should CAC be implemented?

• A. Use a gatekeeper to control allocated bandwidth properly.
• B. Use locations CAC with a single location.
• C. Use a gatekeeper and Cisco Unified Border Element to provide CAC to sites that use a combination of SIPand MGCP gateways.
• D. Use a gatekeeper to only control those locations that use H.323 gateways and a Cisco Unified BorderElement to control those sites that use MGCP or SIP gateways.
• E. Use locations CAC with five locations in addition to Hub none.

Answer: E

NEW QUESTION 3
Which type of dial plan implements destinations by using a format that is similar to email addresses?

• A. H.323.
• B. E.164.
• C. DNS.
• D. URI.

Answer: D

NEW QUESTION 4
Which three steps are needed to enable time-of-day call routing? (Choose three.)

• A. Configure an access list.
• B. Configure a time period.
• C. Configure a time schedule.
• D. Configure a route pattern.
• E. Configure a partition.
• F. Configure dial rules.
• G. Configure a calling search space.

Answer: BCG

Explanation: Reference: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unifiedcommunications-manager-callmanager/109588-tod-routing- example00.html

NEW QUESTION 5
Which four call coverage features are used by voice gateways? (Choose four.)

• A. call hunt
• B. Call Park
• C. Call Pickup
• D. call redirecting
• E. overlaid phone-dn
• F. basic automatic call distribution
• G. overlaid ephone-dn
• H. basic manual call distribution

Answer: ACFG

NEW QUESTION 6
Which two types of encoding are available to configure a T1 controller for CAS? (Choose two.)

• A. B8SF
• B. AMI
• C. B8ZS
• D. SF
• E. AME
• F. ESF

Answer: BC

NEW QUESTION 7
What is the correct configuration order of call routing to support off-net call routing?

• A. device, route group, route list, route pattern
• B. route list, route group, route pattern, device
• C. route pattern, route list, route group, device
• D. device, route list, route group, route pattern

Answer: C

NEW QUESTION 8
Which two statements describe the function of the off-net option in a route pattern? (Choose two.)

• A. The off-net option indicates that if a call is not routed through this route pattern, it is considered off the local network, or “off-net”.
• B. This option could be used to block an external call from transferring to an internal party.
• C. This option could be used to block an external call from transferring to an external party.
• D. The off-net option indicates that if a call is routed through this route pattern, it is considered off the local network, or “off-net.”

Answer: CD

NEW QUESTION 9
Which route pattern is the best match for the range of 6000 to 6599?

• A. 65XX
• B. 60XX
• C. 6[05]XX
• D. 6XXX
• E. 6[0-5]

Answer: E

NEW QUESTION 10
You are performing route pattern configuration. You need to ensure that internal extensions are automatically expanded to full external phone numbers for calling line information on outgoing calls. What should you use?

• A. calling extension expansion
• B. called number expansion
• C. external number mask of the called party
• D. external phone number mask of the calling party

Answer: D

NEW QUESTION 11
Which three devices are analyzed by the Cisco Unified Communications Dialed Number Analyzer?
(Choose three.)

• A. gatekeeper
• B. remote destination
• C. CTI route point
• D. trunk
• E. phone
• F. gateway

Answer: DEF

NEW QUESTION 12
Which three configuration options are currently unsupported when configuring the Cisco Unified Border Element for videoconferencing? (Choose three)

• A. RSVP synchronization of H.323 calls.
• B. Multiple logical channels per call leg.
• C. H.323-to-SIP video traffic.
• D. FECC support.
• E. Video endpoints with different H.245 versions.
• F. Dual video/picture-in-picture.
• G. DSCP marking for video streams.

Answer: CEF

NEW QUESTION 13
Which type of IOS Conference bridge requires all users to use the same video format in order to participate in a video conference?

• A. Ad Hoc Conferencing
• B. Homogenous Conferencing
• C. HeterogeneousConferencing
• D. Guaranteed Audio Video Conferencing
• E. Meet-Me Conferencing

Answer: B

Explanation: A homogenous conference refers to one in which participants connect to the ISR G2 with devices that support the same video format attributes (for example, the same codec, resolution, frame rate, and bit rate).

NEW QUESTION 14
What is the correct path selection for a call that is routed through a Cisco Unified Communications Manager system?

• A. Devices -> Route Group -> Route List -> Route Pattern
• B. Route List -> Route Pattern -> Route Group -> Devices
• C. Route Pattern -> Route List -> Route Group -> Devices
• D. Route Group -> Devices -> Route Pattern -> Route List

Answer: C

NEW QUESTION 15
Which two options are applications that support service categories in Cisco Unified Communications Manager? (Choose two)

• A. WAV
• B. Java MIDlet
• C. CSV
• D. XML

Answer: BD

NEW QUESTION 16
Refer to Exhibit:

An engineer is working on a ticket that reports TEL1 cannot call TEL2. These dial peers are configured to route the call between the endpoints.
dial-peer voice 2001voip destination-pattern 2001 session protocol sipv2 session target ipv4:10.1.1.2 incoming called-number . codec g722-64
video codec h264
dtmf-relay rtp-nte sip-notify sip-kpml no vad
dial-peer voice 3001 voip
destination-pattern 3001 session protocol sipv2 session target ipv4:10.3.1.2 incoming called-number . codec g722-64
video codec h264
dtmf-relay rtp-nte sip-notify sip-kpml no vad
While troubleshooting, the engineer discovers that the Cisco Unified Border Element is giving the error “SIP/2.0 403 Forbidden”. Which two Cisco Unified Border Element configurations resolve this issue? (Choose two.)

• A. voice service voip mode border-element ip address trusted listipv4 10.1.1.0 255.255.255.0ipv4 10.2.1.0 255.255.255.0allow-connections sip to sip sipbind control source-interface loopback0 bind media source-interface loopback0
• B. voice service voipno ip address trusted authenticate mode border-elementallow-connections sip to sip sipbind control source-interface loopback0 bind media source-interface loopback0
• C. voice service voip mode border-element ip address trusted listallow-connections sip to sipsipbind control source-interface loopback0 bind media source-interface loopback0
• D. voice service voip mode border-elementallow-connections sip to sip sipbind control source-interface loopback0 bind media source-interface loopback0
• E. voice service voip mode border-element ip address trusted listipv4 10.1.1.0 255.255 255.0ipv4 10.3.1.0 255.255.255.0allow-connections sip to sip sipbind control source-interface loopback0 bind media source-interface loopback0

Answer: BE