Pinpoint 300-075 Exam Questions 2021

We provide 300 075 dump in two formats. Download PDF & Practice Tests. Pass Cisco 300-075 Exam quickly & easily. The 300-075 PDF type is available for reading and printing. You can print more and practice many times. With the help of our 300 075 ciptv2 product and material, you can easily pass the 300-075 exam.

Also have 300-075 free dumps questions for you:

NEW QUESTION 1
Which two options are dial plan elements that Global Dial Plan Replication allows independent clusters to share with each other using the Intercluster Lookup service?

  • A. enterprise alternate numbers
  • B. voicemail profites
  • C. +W.164 alternate numbers
  • D. external phone number masks
  • E. actual directory numbers

Answer: BD

NEW QUESTION 2
On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend?

  • A. media resources
  • B. region
  • C. physical location
  • D. enterprise parameters
  • E. location

Answer: B

NEW QUESTION 3
Company X has three locations connected via a low bandwidth WAN. Which two configurations are
required in the Cisco Unified Communications Manager region to provide the most suitable use of bandwidth while preserving the call quality? (Choose two)

  • A. g722/g711 for interregion calling
  • B. g722/g7l1 codec for all calling
  • C. g729 codec for all calling
  • D. g729 codec for intraregion calling
  • E. g722/g711 codec for interregion calling
  • F. g729 codec for interregion calling

Answer: AF

NEW QUESTION 4
Which two statements about configuring mobile and remote access on Cisco TelePresence Video Communication Server Expressway are true? (Choose two.)

  • A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
  • B. The traversal client zone and the traversal server zone Media encryption mode must be set to Force encrypted.
  • C. The traversal client zone and the traversal server zone Media encryption mode must be set to Auto.
  • D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
  • E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify mode set to On.

Answer: BE

NEW QUESTION 5
When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco
VCS Control, which portion of the destination URI is the is the first match that is attempted?

  • A. the full URI, including the domain portion
  • B. the destination alias, without the domain portion
  • C. the E.164 number that is assigned to the Cisco TelePresence EX90
  • D. the directory number that is assigned to the Cisco TelePresence EX90

Answer: B

NEW QUESTION 6
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are correct?(Choose
two.)

  • A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
  • B. Endpoint are associated to default subzone or any customized subzone depending on the IP address of the endpoint.
  • C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
  • D. You can register endpoints to default zone.
  • E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and firewall traversal.

Answer: CE

NEW QUESTION 7
The VCS Expressway can be configured with security controls to safeguard external calls and endpoints. One such option is the control of trusted endpoints via a whitelist. Where is this option enabled?

  • A. on the voice-enabled firewall at the edge of the network
  • B. on the VCS under Configuration > registration > configuration
  • C. on the TMS server under Registrations > whitelist
  • D. on the VCS under System > configuration > Registrations

Answer: B

NEW QUESTION 8
You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote site. During a
network failure between the remote site and the central office, some of the phones located at the
remote site are unable to make phone calls. Which two options are potential causes of the problem? (Choose two.)

  • A. The site has exceeded the number of SRST endpoints supported by the voice gateway.
  • B. The ccm-manager fallback command is configured incorrectly on the voice gateway.
  • C. Phones at the remote site are assigned to the incorrect device pool.
  • D. The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway.
  • E. The site has exceeded the number of simultaneous calls allowed in SRST mode.

Answer: AC

NEW QUESTION 9
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
300-075 dumps exhibit
Locations:
300-075 dumps exhibit
CSS:
300-075 dumps exhibit
SRST:
300-075 dumps exhibit
SRST-BR2-Config:
300-075 dumps exhibit
BR2 Config:
300-075 dumps exhibit
SRSTPSTNCall:
300-075 dumps exhibit
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the
following reasons could be causing this failure?

  • A. Device Pool cannot be default.
  • B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
  • C. The router does not support SRST.
  • D. The SRST enabled router is not configured correctly.

Answer: A

NEW QUESTION 10
Refer to the exhibit.
300-075 dumps exhibit
The "DSCP for Video Calls" Cisco CallManager service parameter is set to 34. What is the correct
DSCP value to use when configuring a class map in a Cisco IOS router?

  • A. cs4
  • B. ef
  • C. af23
  • D. af41

Answer: D

NEW QUESTION 11
How many active gatekeepers can you define in a local zone?

  • A. 1
  • B. 2
  • C. 5
  • D. 10
  • E. 15
  • F. unlimited

Answer: A

NEW QUESTION 12
If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager Administration, what must you do first?

  • A. Disassociate the trunk from the CCD advertising service or CCD requesting service.
  • B. Delete the trunk from the CCD requesting service node.
  • C. Place the Cisco Unified Communications Manager node in standby mode.
  • D. Redirect CCD advertising and requesting services to another Cisco Unified Communications Manager.

Answer: A

NEW QUESTION 13
In Cisco Unified Communications Manager, where do you configure the default bit rate for audio and video devices?

  • A. Enterprise Parameters
  • B. Region under Region Information
  • C. Cisco CallManager service under Service Parameter Configuration
  • D. Enterprise Phone Configuration

Answer: C

NEW QUESTION 14
To which subzone can you apply bandwidth limitations?

  • A. default, traversal, and all manually configured subzones
  • B. manually configured subzones
  • C. cluster
  • D. default

Answer: A

NEW QUESTION 15
What is an advantage of TEHO?

  • A. TEHO implemented with ISRs eliminates PSTN toll charges.
  • B. TEHO implemented with ISRs can reduce PSTN toll charges.
  • C. TEHO implemented with AAR reduces toll charges.
  • D. TEHO implemented with CFUR reroutes calls.

Answer: B

NEW QUESTION 16
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is correct?

  • A. policy-map policy1 class class1set ip dscp 5 class class2set ip dscp C S3
  • B. policy-map policy1 class class1set ip dscp ef class class2 set ip dscp 5
  • C. policy-map policy1 class class1set ip dscp 5 class class2 set ip dscp ef
  • D. policy-map policy1class class1 set ip dscp 3 class class2 set ip dscp ef

Answer: B

Recommend!! Get the Full 300-075 dumps in VCE and PDF From 2passeasy, Welcome to Download: https://www.2passeasy.com/dumps/300-075/ (New 245 Q&As Version)