NEW QUESTION 1
Which command displays the detailed configuration of all the Cisco Unified IP phones, voice ports,
and dial peers of the Cisco Unified SRST router?

• A. show call-manager-fallback all
• B. show dial-peer voice summary
• C. show ephone summary
• D. show voice port summary

Answer: A

NEW QUESTION 2
Refer to the exhibit.

Which option describes the effect of this configuration?

• A. It implements Cisco United CME redundancy.
• B. It configures a standby Cisco Unified E.
• C. It configures failover.
• D. It implements Cisco IOS redundancy.
• E. It creates dial peers.
• F. It implements HSRP.

Answer: A

NEW QUESTION 3
Which two statements about Cisco Unified Communications Manager Extension Mobility are true? (Choose two.)

• A. After an autogenerated device profile is created, you can associate it with one or more users.
• B. An autogenerated device profiles can be loaded on a device at the same time as a user profile.
• C. A device can adopt a user profile even when no user is logged in.
• D. A device profile has most of the same attributes as a physical device.
• E. Devices can be configured to allow more than one user to be logged in at the same time.

Answer: BC

Explanation:
Reference: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter 0
9186a0080153e60.html#wp1092734
Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html#wp1153 166

NEW QUESTION 4
A voice engineer is enabling video capabilities between H.323 and SIP endpoints. Which component
allows for standardized caller addresses between the endpoints?

• A. search rules
• B. SIP route pattern
• C. policy service
• D. transform

Answer: B

Explanation:
Reference: http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_guide_chapter09186a0 0
800eadee.html

NEW QUESTION 5
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.
The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows
DP:

Locations:

CSS:

Movie Failure:

Movie Settings:

CIPTV2 Topology:

Subzone:

Links:

Pipe:

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two)

• A. Incorrect username and password.
• B. Wrong SIP domain configured.
• C. User is not associated with the device.
• D. IP or DNS name resolution issue.
• E. CSF Device is not registered.
• F. IP Phone DN not associated with the user.

Answer: BD

NEW QUESTION 6
Company X has a Cisco Unified Communications Manager cluster and a Cisco Unity Connection
cluster at its head office and implemented SRST for its branch offices. One Monday at 2:00 pm, the WAN connection to a branch office failed and stayed down for 45 minutes. That day the help desk received several calls from the branch saying their voicemail was not working but they were able to make and receive calls.
Why did the users not realize the WAN was down and prevented access to their voicemail?

• A. All the phones should have started ringing the instant the WAN connection failed to signal the start of SRST mode.
• B. All calls should have dropped when the WAN failed so users would be instantly aware.
• C. Although the phones were still working, the users should have noticed that the phone displays said "SRST Fallback Active".
• D. The voice administrators at the head office did not call the users to notify them.

Answer: C

NEW QUESTION 7
A new administrator at Company X has deployed a VCS Control on the LAN and VCS Expressway in
the DMZ to facilitate VPN-less SIP calls with users outside of the network. However, the users report that calls via the VCS are erratic and not very consistent.
What must the administrator configure on the firewall to stabilize this deployment?

• A. The VCS Control should not be on the LAN, but it must be located in the DMZ with the Expressway.
• B. The firewall at Company X must have all SIP ALG functions disabled.
• C. The firewall at Company X requires a rule to allow all traffic from the DMZ to pass to the same network that the VCS Control is on.
• D. A TMS server is needed to allow the firewall traversal to occur between the VCS Expressway and the VCS Control servers.

Answer: B

NEW QUESTION 8
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the
local cluster from routing calls to a specific pattern learned via ILS What should be configured within the local CUCM cluster to accomplish this?

• A. Create a block transformation pattern.
• B. Create a block route pattern.
• C. Create a block translation pattern.
• D. Create a block learned pattern.

Answer: C

NEW QUESTION 9
An engineer must resolve a call failure issue. When using RTMT, the engineer notices that the
Location Bandwidth Manager-OutOfResources counter is showing a positive value. Which option is the cause of the call failure?

• A. lack of audio bandwidth
• B. lack of video bandwidth
• C. lack of transcoding resources
• D. lack of audio or video bandwidth
• E. lack of conferencing resources

Answer: A

NEW QUESTION 10
When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be
tagged with DSCP AF41?

• A. Set QoS mode to DiffServ and tag value 32.
• B. Set QoS mode to IntServ and tag value to 34.
• C. Set QoS mode to DiffServ and tag value 34.
• D. Set QoS mode to IntServ and tag value to 32.
• E. Set QoS mode to ToS and tag value to 32.

Answer: C

NEW QUESTION 11
Which three messages does a Cisco VCS use to monitor the Presence status of endpoints?
(Choose three.)

• A. start-call
• B. in-all
• C. end-call
• D. call-ended
• E. call-started
• F. registration

Answer: BDF

Explanation:
Reference:
http://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/vcs_monitors_presence
_ status_endpoints_kb_186.html

NEW QUESTION 12
Which action configures phones in site A to use G.711 to site B, but uses G.729 to site C?

• A. Configure Cisco Unified Communications Manager regions.
• B. Configure Cisco Unified Communications Manager locations.
• C. Configure transcoder resources in Cisco Unified Communications Manager.
• D. Configure a gatekeeper.

Answer: A

NEW QUESTION 13
Which system configuration is used to set a restriction on audio bandwidth?

• A. region
• B. location
• C. physical location
• D. licensing

Answer: B

NEW QUESTION 14
A presales engineer is working on a quote for a major customer and must evaluate how many Cisco
VCS Expressway traversal call licenses for which to plan. Calls to and from which three routes must
the engineer include in the tally? (Choose three.)

• A. gateway
• B. Cisco 9971 Endpoint
• C. border controllers
• D. gatekeeper
• E. SIP trunk
• F. VCS

Answer: DEF

NEW QUESTION 15
Which statement about the function of the "+" symbol in the E.164 format is true?

• A. The "+" symbol represents the international country code.
• B. The "+" symbol represents the international call prefix.
• C. The "+" symbol matches the preceding element one or more times.
• D. The "+" symbol matches the preceding element zero or one time.

Answer: B

NEW QUESTION 16
Which two options are configuration steps on Cisco Unified Communications Manager that are used
when integrating with VCS Expressway servers? (Choose two.)

• A. allowing numeric dialing from Cisco phones to Expressway
• B. configuring a device pool with video feature enabled
• C. allowing dialing to Expressway domain from Cisco phones
• D. creating an application user on Cisco Unified Communications Manager with assigned privileges
• E. adding the Expressway servers to the Application Servers list

Answer: AC