NEW QUESTION 1
Which two bandwidth management parameters are available during the configuration of Cisco
Unified Communications Manager regions? (Choose two.)

• A. Default Audio Call Rate
• B. Max Audio Bit Rate
• C. Default Video Call Rate
• D. Max Video Call Bit Rate (Includes Audio)
• E. Max Number of Video Sessions

Answer: BD

NEW QUESTION 2
When you configure TEHO for long-distance calls and use the local PSTN gateways as fallback, how many route patterns do you require for a cluster with five sites that are located in different area codes?

• A. 6 when using a local route group
• B. 10 when not using a local route group
• C. 5 when using a local route group
• D. 15 when not using a local route group

Answer: A

NEW QUESTION 3
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show
Advance section of the SAF Forwarder configuration?

• A. Configure the publisher node only in the SAF Forwarder configuration page.
• B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration page.
• C. Configure the correct node in the EIGRP configuration of the gateway router that is associated with the Cisco Unified Communications Manager node.
• D. Configure the SAF Security Profile Configuration to support only a single node.

Answer: B

NEW QUESTION 4
The administrator at Company X is getting user reports of inconsistent quality on video calls between
endpoints registered to Cisco Unified Communications Manager. The administrator runs a wire trace while a video call is taking place and sees that the packets are not set to AF41 for desktop video as they should be.
Where should the administrator look next to confirm that the correct DSCP markings are being set?

• A. on the MGCP router at the edge of both networks
• B. the service parameters in the VCS Control
• C. the QoS service parameter in Cisco Unified Communications Manager
• D. on the actual Cisco phone itself because the DSCP setting is not part of its configuration file downloaded at registration
• E. The setting cannot be changed for video endpoints that are registered to Cisco Unified Communications Manager, but only when they are registered to the VCS Control.

Answer: C

NEW QUESTION 5
Company X currently uses a Cisco Unified Communications Manager, which has been configured for IP desk phones and Jabber soft phones. Users report however that whenever they are out of the office, a VPN must be set up before their Jabber client can be used. The administrator for Company X has deployed a Collaboration Expressway server at the edge of the network in an attempt to remove the need for VPN when doing voice. However, devices outside cannot register.
Which two additional steps are needed to complete this deployment? (Choose two.)

• A. A SIP trunk has to be set up between the Expressway-C and Cisco UCM.
• B. An additional interface must be enabled on the Cisco UCM and placed in the same subnet at the Expressway.
• C. The customer firewall must be configured with any rule for the IP address of the external Jabber client.
• D. The Expressway server needs a neighbor zone created that points to Cisco UCM.
• E. Jabber cannot connect to Cisco UCM unless it is on the same network or a VPN is set up from outside.

Answer: AD

NEW QUESTION 6
After forgetting to log out of his IP phone in the main office, an Extension Mobility user is unable to log in to a different IP phone at a remote office. Which option is a possible reason for the problem?

• A. The phone at the remote location is a different model than the phone in the user’s main office.
• B. The user’s Extension Mobility profile is misconfigured.
• C. The user can log in to only one device at a time.
• D. The device pool is misconfigured.

Answer: C

NEW QUESTION 7
Which statement about the host portion format in Cisco Unified Communications Manager URI
dialing is false?

• A. The host portion cannot start or end with a hyphen.
• B. The host portion is not case sensitive.
• C. The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods.
• D. The host portion can have two periods in a row.

Answer: D

NEW QUESTION 8
Which code snippet is required for SAF to be initialized?

• A. Service Family
• B. External-Client
• C. router eigrp
• D. topology base

Answer: C

NEW QUESTION 9
A local gateway is registered to Cisco TelePresence Video Communication Server with a prefix of 7. The administrator wants to stop calls from outside the organization being routed through it. Which CPL configuration accomplishes this goal?
A)

B)

C)

D)

E)

• A. Exhibit A
• B. Exhibit B
• C. Exhibit C
• D. Exhibit D
• E. Exhibit E

Answer: A

NEW QUESTION 10
Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder?

• A. Call Control Discovery requesting service
• B. Hosted DNs service
• C. Service Advertisement Framework client control
• D. Cisco Unified Communications Manager database
• E. Service Advertisement Framework-enabled trunk
• F. gatekeeper

Answer: C

NEW QUESTION 11
For inbound calls that use SIP gateways to cisco unified communications manager, which two options
are available when configuring the format for the calling number type? (Choose two)

• A. Unknown
• B. Subscriber
• C. Long Distance
• D. Default
• E. SIP

Answer: BC

NEW QUESTION 12
A voicemail product that supports only the G.711 codec is installed in headquarters. Which action
allows branch Cisco IP phones to function with voicemail while using only the G.729 codec over the WAN link to headquarters?

• A. Configure Cisco Unified Communications Manager regions.
• B. Configure transcoding within Cisco Unified Communications Manager.
• C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.
• D. Configure transcoder resources in the branch Cisco IP phones.

Answer: C

NEW QUESTION 13
What is the default DHCP/PHB values for Tele Presence streaming video packets in Cisco Unified
Communications Manager?

• A. CS6/48
• B. CS3/24
• C. CS4/32
• D. AF41/34
• E. EF/46

Answer: D

NEW QUESTION 14
Which three steps are necessary to configure mobile and remote access on Cisco VCS Control? (Choose three)

• A. Register voice gateways with Cisco Unified Communications Manager
• B. Configure Cisco VCS for Cisco Unified Communication
• C. Configure Directory Services for Cisco Unified Communication
• D. Discover Cisco Unified Communicators Manager and IM&P Servers.
• E. After the discovery confirm the connectivity between Cisco VCS Control with Cisco Unified Communication Manager and IM&P
• F. Configure DNS and NTP

Answer: ABF

NEW QUESTION 15
An engineer is performing an international multisite deployment and wants to create an effective backup method to access TEHO destinations in case the call limit triggers. Which technology provides this ability?

• A. AAR
• B. CFUR
• C. LRG
• D. SRST

Answer: A

NEW QUESTION 16
Select two command. One of which can be used to verify Cisco Ip phone Sip registration and one of which can be used to verify Cisco Ip phone sccp registration on Cisco unified Communications Manager express? (Choose two)

• A. show ccm-manager hosts
• B. show ephone registered
• C. show voice register session-server
• D. show sip-ua status registrar
• E. show telephony-service ephone-dn

Answer: BD