NEW QUESTION 1

An administrator is asked to configure NVMe on an ONTAP 9.5 cluster for host access. Which three steps must the administrator perform to accomplish this task? (Choose three.)

• A. Create a namespace.
• B. Provision a subsystem.
• C. Configure the FC port.
• D. Gather the IQN from the host initiator software.
• E. Gather the NQN from the host system.

Answer: ABE

Explanation:
Reference: https://thinksystem.lenovofiles.com/storage/help/topic/san_administration_guide/M_DDA6B457- 8544-43AC-92E8-D846A0BA7671_.pdf (26)

NEW QUESTION 2


A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1. Referring to the exhibit, what will happen?

• A. The NVMe namespaces on AFF_2 will be available after takeover of AFF_1.
• B. The FC LUNs that use cluster interconnect to access the LUNs on AFF_1 will be unavailable after failover.
• C. The FC LUNs on node AFF_2 will be unavailable after failover of AFF_1.
• D. The NVMe namespaces on AFF_1 will be unavailable after takeover by AFF_2.

Answer: C

NEW QUESTION 3

You want to move a SAN LIF and preserve its configuration information and avoid rezoning the switch fabric. In this scenario, which two steps must be performed to fulfill this goal? (Choose two)

• A. Move the SAN LIF to another node in a cluster on a different storage virtual machine (SVMs)
• B. Keep the SAN LIF online before it is moved
• C. Take the SAN LIF offline before it is moved
• D. Move the SAN LIF to another node in a cluster on existing storage virtual machine (SVMs)

Answer: CD

Explanation:
Moving SAN LIFs
If a node needs to be taken offline, you can move a SAN LIF to preserve its configuration information, such as its WWPN, and avoid rezoning the switch fabric. Because a SAN LIF must be taken offline
before it is moved, host traffic must rely on host multipathing software to provide nondisruptive access to the LUN. You can move SAN LIFs to any node in a cluster, but you cannot move the SAN LIFs
between storage virtual machines (SVMs). Yoy can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID-09F5C2A3-FA6

NEW QUESTION 4

A customer is deploying a SAN cluster of A700 nodes and wants to ensure that the SAN cluster will maintain a quorum in the event of a rack level power failure. Which two statements are true in this scenario? (choose two.)

• A. Six nodes are required
• B. Four nodes are required
• C. Three racks are required
• D. Two racks are required

Answer: AC

Explanation:
The quorum rule states that to make changes to the configuration in our cluster, we need to have more than half of the nodes available. This prevents configuration conflicts if we lose connectivity between the nodes in our cluster.
So, if we have only 2 racks and 4 nodes we could never get more than half of the nodes available if one of those racks power fails.
We need 6 nodes separated on 3 racks, so we can have more than half of the nodes available if one of those racks power fails.

NEW QUESTION 5

You want configure namespaces to support NVMe over Fibre Channel (NVMe/FC) using ONTAP 9.8. Which action will accomplish this task?

• A. Add FC to the list of SVM protocols
• B. Remove any protocols from the SVM before adding the NVMe protocol
• C. Enable ALUA on the namespaces that should use the NVMe protocol
• D. Configure a LIF for the NVMe protocol

Answer: D

Explanation:
Although ONTAP uses a NVMe/FC LIF that is separate from the FCP LIFs, both LIFs can be hosted on the same physical HBA port at both the host initiator and storage target. NVMe/FC and FCP can
share the same physical infrastructure concurrently, so the same physical port, cable, switch port, and target port can simultaneously host and transmit both FCP and NVMe/FC frames
NVMe can use the same FC infraestructure, but it needs to create a separate NVMe LIF to work. You can find more information on this link:
https://www.netapp.com/de/media/10681-tr4684.pdf (14)

NEW QUESTION 6

Which option needs to be set on a LUN to guarantee that it cannot be affected by other LUNs in the volume?

• A. Volume Guarantee
• B. Volume Space Reserved
• C. LUN Reservation Disabled
• D. LUN Reservation Enabled

Answer: D

NEW QUESTION 7


Referring to the exhibit, which two LIFs would be optimized paths to LUN /vol/OraDev_Vol/OraDev? (Choose two.)

• A. aff_node-01_0g_A
• B. aff_node-02_0e_A
• C. aff_node-02_0g_A
• D. aff_node-01_0e_A

Answer: A

NEW QUESTION 8

An administrator is asked to provision a SAN environment in which host applications can monitor LUN space and performance space reclamation.
Which LUN type would satisfy these requirements?

• A. SCSI thick provisioned LUN
• B. SCSI thin provisioned LUN
• C. NetApp thin provisioned volume
• D. NetApp thick provisioned volume

Answer: B

Explanation:
Automatic host-side space management with SCSI thinly provisioned LUNs
If your host supports SCSI thin provisioning, you can enable the space-allocation option in ONTAP to turn on automatic host-side space management.
You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID-93D78975-6911

NEW QUESTION 9

On your ONTAP 9.5 cluster, you need to set up the onboard key manager with hardware-based security and volume encryption.
Which two licenses are required in this situation? (Choose two.)

• A. FDE
• B. TPM
• C. VE
• D. RSA

Answer: CD

NEW QUESTION 10

How do you configure the iSCSI-SendTargets datastore when the datastore is provisioned from NetApp storage?

• A. You must configure jumbo frames when SendTargets-based iSCSI is used.
• B. Use static discovery to add the target IQN.
• C. Use dynamic discovery to add the target IQN.
• D. You must configure a single protocol on the SVM when SendTargets-based iSCSI is used.

Answer: C

Explanation:

Reference: https://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_iscsi_san_cfg.pdf (37)

NEW QUESTION 11

You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1 - status-admin up command to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected.
In this scenario, what is the next step to bring the LIFs up?

• A. Use the network interface modify command to change the operational status of the LIFs.
• B. Create at least one zone that contains your SVM LIF WWPNs and an initiator.
• C. Verify that an FC license is applied on your system.
• D. Disable the SAN switch port where your NetApp storage is connected.

Answer: B

NEW QUESTION 12

Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

• A. The volume guarantee has no effect.
• B. LUN overwrites are guaranteed.
• C. The LUN might run out of space.
• D. The LUN space reservation has no effect.

Answer: BC

NEW QUESTION 13

Which two are supported in ONTAP 9.5? (Choose two.)

• A. an NVMe LIF and an FC LIF in the same SVM
• B. an NVMe LIF associated with an FC Direct Connect port
• C. a NVMe LIF and an FC LIF associated with the same port
• D. multiple NVMe LIFs in the same SVM

Answer: CD

NEW QUESTION 14

You want to ensure maximum performance of iSCSI LUNs on an AFF A220. In this scenario, which two actions will accomplish this task? (Choose two.)

• A. Disable flow control.
• B. Configure virtual LAN (VLAN).
• C. Enable flow control.
• D. Enable jumbo frames.

Answer: CD

NEW QUESTION 15


Referring to the exhibit, which two elements are required for NVMe host access with ONTAP 9.5 and using supported AFF nodes? (Choose two.)

• A. You need 16 Gb FC HBAs installed in the AFF nodes.
• B. You must have the license installed for NVMe support in the cluster.
• C. You must have the license installed for FC support in the cluster.
• D. You need 32 Gb FC HBAs installed in the AFF nodes.

Answer: CD

NEW QUESTION 16

A customer wants to use both Cisco FC and FCoE switches in their ONTAP environment. According to NetApp best practices, what are two requirements in this scenario? (Choose two.)

• A. You must use single initiator zoning.
• B. You must create interface groups to isolate FC and FCoE LIFs.
• C. You must create a trunk with multiple virtual LANs.
• D. You must not have more than one target UF for the same physical port in a single fabric zone.

Answer: AD

NEW QUESTION 17

You have an existing 8-node Netapp Cluster serving NFS data, and you want to expand your cluster by an additional four nodes to serve ISCSI. In this scenario, where would you validate this configuration?

• A. Active IQ Upgrade Advisor
• B. Interoperability Matrix Tool
• C. SAN Administration Guide
• D. Hardware Universe

Answer: D

Explanation:
Hardware Universe shows how many nodes and which filers are compatible to mix between them

NEW QUESTION 18

Which resource would you use to verify whether a specific SAN configuration is supported by NetApp?

• A. SAN Configuration Guide
• B. Hardware Universe (HWU)
• C. Active IQ
• D. Interoperability Matrix Tool (IMT)

Answer: A

Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-sanconf/SAN%20configuration.pdf

NEW QUESTION 19

You are about to replace a failed Brocade Fibre Channel switch. Which three steps do you take prior to connecting the switch in the SAN? (Choose three.)

• A. Force the new switch to be the principle switch.
• B. Change the domain ID of the replacement switch to the domain ID of the failed switch.
• C. Clear all zoning configurations on the replacement switch.
• D. Change the core PID format of the replacement switch to the core PID format of the failed switch.
• E. Preload the zoning information from the fabric onto the new switch.

Answer: BCD

NEW QUESTION 20

Exhibit.

You want to configure a UTA2 port as an FCoE target. Referring to the exhibit, which action must be performed?

• A. Configure the port mode as CNA.
• B. Configure the port mode as Ethernet.
• C. Configure the port type as initiator.
• D. Configure the port mode as FC.

Answer: A

NEW QUESTION 21
......