NEW QUESTION 1
Refer to the exhibit.

An engineer is troubleshooting an outbound call and needs to see each step of the dial plan as it is being parsed in the system. The engineer is not able to see all of the steps in the trace output. How can this problem be resolved?

• A. Change the Digit Analysis Complexity to Translation And Alternate Pattern Analysis.
• B. Change the SDL Trace Max File Size to a higher number because it is not large enough to display dial plan steps.
• C. Change the SSL TraceType Flag to 0x9000EC44.
• D. Change the SSL Trace Flush Immediately to True.

Answer: A

NEW QUESTION 2
An endpoint cannot connect to a valid TFTP server during the registration process. Which two statements describe possible causes? (Choose two.)

• A. The DHCP configuration contains TFTP server 66, but no DNS server is available.
• B. The DHCP configuration contains TFTP server 150, but no DNS server is available.
• C. No separate voice VLAN configuration on the switch port connected to the endpoint.
• D. Cisco Unified Communications Manager CallManager services are not started.
• E. Cisco Unified Communications Manager TFTP services are not started.

Answer: DE

NEW QUESTION 3
A user is dialing an external PSTN number with a prefix of 01 from a Cisco TelePresence SX10 Quick Set in a Cisco VCS environment. In the past, the Cisco VCS and the ISDN gateway were correctly configured with a prefix of 01, but the calls are now failing. What are three possible causes? (Choose three.)

• A. The Cisco VCS Control is down.
• B. The interworking setting is turned off.
• C. The audio feature in the Cisco TelePresence SX10 is turned off.
• D. The SIP trunk is not configured on the gateway.
• E. 01 is not a valid prefix.
• F. ISDN is not enabled on the Cisco TelePresence SX10.
• G. The Cisco TelePresence SX10 is not registered to the Cisco VCS Control.
• H. The Cisco TelePresence SX10 is not registered to the Cisco Express C.

Answer: ABG

NEW QUESTION 4
Refer to the exhibit.

Which dial peer is matched on the incoming leg (POTS/ISDN)?

• A. dial-peer voice 4 pots
• B. dial-peer voice 3 pots
• C. dial-peer voice 2 pots
• D. dial-peer voice 1 pots

Answer: D

NEW QUESTION 5
Refer to the exhibit.

An engineer recently configured a Cisco Unified Communications Manager cluster. The
users are reporting that extensions starting with 10 are routing to a different office. Based on the output, what is the root cause of the issue?

• A. The destination partition is missing from the assigned calling search space
• B. Urgent priority is chosen on a translation or route pattern
• C. The incorrect calling search space was assigned to the phones
• D. The extension is a shared line, and one of the phones is unregistered

Answer: A

NEW QUESTION 6
You have just configured Cisco CallManager.
A few users in your organization complain that when they log out, the phones are reset. You need to provide a solution to this problem.
What should you do?

• A. Restart the TFTP service.
• B. Restart the Internet Information Service (IIS).
• C. Change the DNS address to IP address.
• D. Restart the Computer Telephony Integration (CTI).
• E. Reboot the phones.
• F. Edit the form.jsp file and make appropriate changes.

Answer: C

NEW QUESTION 7
Replication fails in a large Cisco Unified Communications Manager cluster that contains eight nodes. There are no issues with reachability between cluster nodes, and the utils dbreplication runtimestate command shows “out of sync” or “not requested” statuses. Which reason that is occurring is true?

• A. The replication timeout is too small
• B. Authentication failed on at least one of the nodes
• C. The clock of the Publisher is not synchronized
• D. The tables on one or more nodes are mismatched

Answer: A

NEW QUESTION 8
Some users report that they cannot dial out from headquarters on their Cisco IP Phones to PSTN users, but others can. Which troubleshooting approach is the most direct to isolate the source of the failure of the users that cannot dial out to the PSTN?

• A. Use DNA to analyze the dialing permissions of the Cisco IP Phones.
• B. Use DNA to generate actual calls to the PSTN.
• C. Use RTMT to analyze the dialing permissions of the Cisco IP Phones.
• D. Use RTMT to generate actual calls to the PSTN.

Answer: A

NEW QUESTION 9
You have sites across a WAN and because of a recent change on the access control lists, your SIP phones are having registration issues.
Which cause is likely?

• A. TCP/UDP 0506 is blocked by the ACL.
• B. TCP/UDP 5006 is blocked by the ACL.
• C. TCP/UDP 5060 is blocked by the ACL.
• D. TCP/UDP 6050 is blocked by the ACL.

Answer: C

NEW QUESTION 10
When parsing trace output after the call routing decision and path selection have been made, which two records can be found in the CCM|RouteList? (Choose two.)

• A. PretransfromDigitString
• B. CallingPartyNumber
• C. PretransformCallingPartyNumber
• D. RouteListName
• E. findLocalDevice
• F. RouteListCdrc :

Answer: DF

NEW QUESTION 11
You are integrating a new video endpoint with Cisco VCS, but you find that the unit is failing to register. You assign extension 4000 to the device in the "vc.cisco.com" SIP domain, and you set its registration proxy to the IP address of 10.1.1.10 as the Cisco VCS. In order for the device to register via SIP, which format must you use when you set the SIP address of the device?

• A. 4000@vc.cisco.com
• B. 4000
• C. 4000@10.1.110
• D. 4000@cisco

Answer: A

NEW QUESTION 12
If a user receives a reorder tome after dialing a number, the Cisco Unified Communications Manager bandwidth allocation for the location of one of the call end devices may have been exceeded. Which option is true?

• A. If the call is using G.711, Cisco Unified CM subtracts 64k.If the call is using G.723, Cisco Unified CM subtracts 16
• B. If the call is using G.729, Cisco Unified CM subtracts 8k.
• C. If the call is using G.711, Cisco Unified CM subtracts 80k.If the call is using G.723, Cisco Unified CM subtracts 24
• D. If the call is using G.729, Cisco Unified CM subtracts 24k.
• E. If the call is using G.711, Cisco Unified CM subtracts 80k.If the call is using G.723, Cisco Unified CM subtracts 24
• F. If the call is using G.729, Cisco Unified CM subtracts 16k.
• G. If the call is using G.711, Cisco Unified CM subtracts 64k.If the call is using G.723, Cisco Unified CM subtracts 24
• H. If the call is using G.729, Cisco Unified CM subtracts 8k.

Answer: B

NEW QUESTION 13
Cisco TelePresence system ex90#1 is trying to call EX90 #2. Both endpoints are registered to Cisco Unified Communications Manager. The call connects, but the quality is not good. The video image is breaking up on EX90 #2. The media path from A to B supports only 2 Mb. Which three reasons are possible causes? (choose three.)

• A. The camera on system B has a loose cable.
• B. The line is congested, and QoS is not configured correctly between the sites.
• C. Bandwidth Imitation between IP zones is set too low for video.
• D. Bandwidth Imitation between regions is set too low for video.
• E. The autonegotiation protocol H 296 is tuned off on one of the EX90s.
• F. The system is set to use a higher bandwidth than the media path allows.

Answer: BDE

NEW QUESTION 14
As a Voice Administrator, you have configured the Service Advertisement Call Control Discovery (CCD) feature. When you encounter CCD issues, which command would you use on the IOS interface to check all the learned routes on the IOS device?

• A. show eigrp service-family ipv4 topology
• B. show voice safdndb all
• C. show ccm-manager
• D. show eigrp service-family ipv4 interfaces
• E. show voice saf client
• F. show voice saf dial-peer outbound

Answer: B

NEW QUESTION 15
You have an endpoint registration problem with VCS, and the event log reason of “unknown domain”. The domain names that your endpoints are using to register with must be added to this list. Where do you check the list of defined domains?

• A. VCS configuration > Domains > SIP
• B. VCS configuration > Protocols > SCCP > Domains
• C. VCS Domains > Protocols > SIP
• D. VCS configuration > Protocols > SIP > Domains

Answer: D

Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/ vcs_endpoint_registration_problems_kb_460.html

NEW QUESTION 16
A user takes an IP phone from one office to another and just called you to inform that the phone does not work in the new location. Which three things should you check to resolve the issue? (Choose three)

• A. Make sure that the device mobility information contains the correct IP subnet information.
• B. Make sure that physical locations are properly assigned under device pools.
• C. Recreate the phone under a new cluster.
• D. Make sure that the device pool is assigned to a device mobility group.
• E. Reconfigure the remote destination profile.
• F. Check whether the phone is registered under a different MAC address.
• G. Check the local DHCP information for possible clues.

Answer: ABG

NEW QUESTION 17
What is the default directory format that you need to specify for Default TFTP MOH File Path field on the Cisco Unified Communications Manager (CUCM) server?

• A. MoH
• B. TFTPPATHMoH
• C. TFTPPATH
• D. MoHTFTPPATH
• E. TFTPPATHMoHFiles
• F. MoHFiles

Answer: C

NEW QUESTION 18
A Cisco TelePresence SX80 Dial is registered on Cisco Unified Communications Manager is calling a registered H.323 endpoint that is registered to a Cisco VCS Control within the same campus. The call is placed using 6 Mb, however only a 1 MBCall is set up. Where can you find two possible causes for this issue? (Choose two)

• A. The Cisco TelePiesence SX80. which needs an option key to call over 2 M
• B. which also enables multisite calls
• C. in the Region settings in Cisco Unified Communications Manager
• D. bandwidth settings in the SIP trunk profile
• E. legacy telepresence systems that are registered to the Cisco VCS Control and can only do 1 Mb towards a Cisco Unified Communications Manager system
• F. a link and pipe configuration on the VCS to Osco Unified Communications Manager subzone
• G. in the subzone settings of the registered H 323 endpoint

Answer: C

NEW QUESTION 19
Refer to the exhibit.

Based on the ACK SDP output, what can be concluded?

• A. There is no DTMF support for the call.
• B. The total amount of bandwidth for the video channels is 192 kbps.
• C. High-definition video is configureDFor the endpoints
• D. This event is a multipoint video call with three participants.

Answer: D

NEW QUESTION 20
You are troubleshooting an ILS connectivity issue. All clusters are set to “Use TLS Certificates”. Which certificates must be exchanged between Cisco Unified Communications Manager clusters?

• A. Tomcat certificates between all nodes in all clusters.
• B. TLS certificates between publisher nodes in all clusters.
• C. Call Manager certificates between publisher nodes in all clusters.
• D. Tomcat certificates between publisher nodes in all clusters.

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features