NEW QUESTION 1
An endpoint has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a Call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, ABusy tone is heard. What should be checked to resolve this issue?

• A. CUCM zone on the Cisco VCS.
• B. SIP trunk and phone region settings.
• C. SIP trunk registration.
• D. authentication on the SIP trunk.

Answer: B

NEW QUESTION 2
When user attempted to call a Colleague at the same site, the caller received a recording that the call could not be completed as dialed. Which two actions can you take to troubleshoot the problem? (Choose two.)

• A. Reboot the IP phone that the user attempted to call.
• B. Verity that the partition and calling search space are correct.
• C. Reboot the user's IP phone.
• D. Reboot the Cisco Unified communications Manager Cluster.
• E. Ping the remote gateway to verify connectivity.
• F. Use RTMT to trace the call from DN to DN.

Answer: BE

NEW QUESTION 3
You enabled Cisco Unified Mobile Connect for a user, but the user is unable to send calls to a mobile phone from the desk phone. What do you do to resolve the issue?

• A. Restart the phone, and verify that the key is present.
• B. Under User Management > User, make sure that the Mobility option is selected.
• C. Make sure that the phone is subscribed to Extension Mobility.
• D. Add the mobility key to the softkey template that the phone is currently using.

Answer: D

NEW QUESTION 4
You are troubleshooting video quality issues on a Cisco TelePresence TX9000 Series system. Which CLI command shows the total number of lost video packets and the received jitter during a Call in progress?

• A. show call statistics video
• B. show call statistics all
• C. show call statistics detail
• D. show call statistics video detail

Answer: D

NEW QUESTION 5
Refer to the exhibit.

HQ_MRGL is assigned to the HQ IP phones BR_MRGL is assigned to the BR IP phones. The remote site BR IP phones only support G.711 codec. When a Call is placeDFrom an HQ phone to ABR phone, the call fails. Which statement indicates how this issue is resolved?

• A. Configure the transcoder at the HQ site and assign it to HQ_MRG
• B. A transcoder is not neede
• C. The HQ phones will automatically change over to G.711 codec.
• D. The transcoder should be assigned to its own MRG, which should then be assigned to the default device pool at HQ.
• E. Configure the transcoder at the BR site and assign it to BR_MRG

Answer: D

NEW QUESTION 6
An engineer encounters an issue where ACustomer wants to enable multiple Cisco Telepresence conference bridges, but can enable only one. Which option is the cause of this issue?

• A. No valid release key is installed on the TS Conductor.
• B. TS Conductor can support only one conference bridge.
• C. Conference bridge in Cisco Unified Communications Manager under Diagnostics > Conference Bridge is not enabled.
• D. All conference bridges are not added in media resources under MRG in Cisco Unified Communications Manager.

Answer: D

NEW QUESTION 7
Which Cisco Unified Communications Manager tool verifies configured route patterns, calling search spaces, and route groups?

• A. Cisco Unified Reporting
• B. Cisco Unified Communications Manager CDR Analysis and Reporting
• C. Cisco Unified Communications Manager Dialed Number Analyzer
• D. Cisco Unified Real-Time Monitoring Tool

Answer: C

NEW QUESTION 8
An engineer is analyzing an issue about system connection under Cisco TMS connection, where endpoints handled by TMS automatically change from reachable on LAN to behind the firewall status. Which protocol does the network engineer need to troubleshoot the network between managed device Cisco TMS?

• A. SDP
• B. XMPP
• C. FTP
• D. HTTP

Answer: D

NEW QUESTION 9
After you install the Cisco Jabber client, it fails to register with the Cisco Unified Communications Manager server. Which two actions can you take to troubleshoot the problem? (Choose two.)

• A. Verify that the DNS SRV record is correctly configured.
• B. Verify that the LMHOST file is installed on the PC.
• C. Verify that the corporate firewall allows connections to anDFrom the Jabber client.
• D. Reboot the Cisco Unified Border Element Gateway.
• E. Verify Layer 3 connectivity on the gateway.

Answer: AC

NEW QUESTION 10
You have 50 hardware MTP resources and 200 software MTP resources. You want to use hardware resources first, but software is being useDFirst. Where can you confirm the MTP selection order?

• A. Media Resource Group List
• B. Cisco Unified Real-Time Monitoring Tool
• C. MTP list
• D. phone device pool
• E. calling search space
• F. MGCP gateway

Answer: A

NEW QUESTION 11
Drag the network-related video issue on the left to its root cause on the right.

Answer:

Explanation:

NEW QUESTION 12
What is the default maximum login time for a user in Cisco Extension Mobility?

• A. 1 hour
• B. 2 hours
• C. 4 hours
• D. 8 hours
• E. 10 hours
• F. 12 hours
• G. 4 hours
• H. 8 hours
• I. 10 hours
• J. 12 hours
• K. 8 hours
• L. 10 hours
• M. 12 hours
• N. 10 hours
• O. 12 hours
• P. 12 hours

Answer: D

NEW QUESTION 13
Which command is used on an IOS Router that is acting as a SAF Forwarder to confirm its registration status with a SAF Client?

• A. show ip asf-forwarder status details
• B. show ospf neighbor details
• C. show ip interface details
• D. show cdp neighbor details
• E. show eigrp service-family ipv4 clients details
• F. show service-family asf-forwarder details

Answer: E

NEW QUESTION 14
Cisco Unified Communications Manager failed to register with the Cisco SAF Forwarder. Assuming that the Cisco IOS SAF Forwarder is configured correctly, which minimum configuration would be needed on Cisco Unified Communications Manager to test registration?

• A. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD advertising service
• B. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD requesting service
• C. SAF trunk, SAF security profile, Cisco SAF Forwarder, CCD requesting service, and CCD advertising service
• D. SAF trunk, SAF security profile, and Cisco SAF Forwarder
• E. SAF trunk, CCD requesting service, and CCD advertising service

Answer: B

NEW QUESTION 15
When dialing any external SIP URI for ABusiness-to-business call, an endpoint that is registered to the Cisco VCS Control fails to locate the remote endpoint. The same endpoint can successfully call another endpoint that is registered to the Cisco VCS Expressway. How do you resolve this issue?

• A. Add traversal call licensing on the Cisco VCS Expressway.
• B. Add traversal call licensing on the Cisco VCS Control.
• C. Add a multisite option to the endpoint.
• D. Configure a proper DNS zone on the Cisco VCS Expressway.
• E. Configure a traversal zone between the Cisco VCS Control and the Cisco VCS Expressway.
• F. Configure a SIP route pattern in Cisco Unified Communications Manager.

Answer: D

NEW QUESTION 16
What is the default interval for SAF hello packets?

• A. 15 seconds
• B. 15 seconds on links with speeds that are slower than T1 speeds
• C. 40 seconds
• D. 40 seconds on links with speeds that are slower than T1 speeds
• E. 60 seconds
• F. 60 seconds on links with speeds that are slower than T1 speeds

Answer: F

NEW QUESTION 17
How does an IP Phone react upon initialization, if there is no CTL and ITL files present on the device?

• A. The phone downloads only the files that are signed to that device.
• B. The phone blindly trusts the next series of downloadeDFiles.
• C. The file matches the signature against the files on TFTP.
• D. The phone displays the message, Unprovisioned.

Answer: D

NEW QUESTION 18
You must integrate a third-party H.323 system with your existing Cisco Unified Communications Manager cluster. When you create an H.323 trunk from the cluster, calls from the cluster to the third-party H.323 system are failing. The vendor of the third-party H.323 device has confirmed that the H.323 call setup time must be reduced. Which two approaches reduce the call setup time from Cisco Unified Communications Manager to the third-party H.323 device? (Choose two.)

• A. Implement a software MTP.
• B. Implement a hardware MTP.
• C. Implement transcoding with the router DSP resources.
• D. Implement transcoding with the Cisco Unified Communications Manager resources.

Answer: AB

NEW QUESTION 19
An engineer is troubleshooting an existing dial plan anDEncounters the dial pattern: 12[0-5]X Which directory numbers are matched by this pattern?

• A. 120 through 125
• B. 1200 through 1250
• C. 1200 through 1259
• D. all numbers starting with 12

Answer: A

NEW QUESTION 20
ACustomer reports trial calls that are made through the PSTN gateway drop after few seconds of being placed on mute. Which MGCP configuration command can you issue in the gateway to resolve this problem?
Refer to the exhibit.

• A. mgcp explicit hookstate
• B. mgcp max-walling-delay
• C. no mgcp rtp unreachable timeout
• D. no mgcp timer receive-rtcp

Answer: C