NEW QUESTION 1
Which configuration must be made to run the fabric interconnects as a vPC pair?

• A. The Ethernet mode must be set to switching.
• B. The Layer 1 and Layer 2 cables must be configured as a vpc
• C. The fabric interconnects cannot run as a VPC pair
• D. The ethernet mode must be set to end host

Answer: C

Explanation: https://supportforums.cisco.com/t5/unified-computing-system/benefits-to-vpc-on-6200s-fabric-interconnects-inu

NEW QUESTION 2
Which two statements about MAC addresses in the Cisco UCS are true? (Choose two.)

• A. The first 2 octets represent the manufacturer OUI.
• B. The first 3 octets represent the manufacturer OUI.
• C. The last 3 octets are assigned by the organization itself.
• D. The last 4 octets are assigned by the organization itself.

Answer: BC

Explanation: https://supportforums.cisco.com/t5/unified-computing-system/oui-for-wwn-and-macs/td-p/1441710 https://supportforums.cisco.com/t5/unified-computing-system/when-to-use-wwnn-and-wwpn-pools/tdp/1614344 http://www.vmwareadmins.com/using-a-address-naming-convention-with-cisco-ucs/ https://en.wikipedia.org/wiki/MAC_address

NEW QUESTION 3
In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

• A. allows reserve vNICs to be allocated out of the spares pool
• B. enables hardware-based failover
• C. enables static binding of the VM port profile to dynamic vNICs
• D. selects the primary fabric association for dynamic vNICs
• E. allows dynamic vNICs to be reserved for fabric failover

Answer: D

NEW QUESTION 4
Which two Cisco UCS C-Series server components are hot-swappable? (Choose two.)

• A. mezzanine card
• B. PCle slot
• C. internal cooling fan
• D. power supply
• E. memory riser

Answer: CD

NEW QUESTION 5
In an environment where multiple LDAP servers are used for user authentication, which Cisco UCS Manager feature must be configured?

• A. LDAP Locale
• B. Organization
• C. LDAP Provider Group
• D. Authentication Domain

Answer: D

Explanation: For implementations involving multiple LDAP databases, configure an LDAP instance. Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/sample_configurations/UCSM_1_4_LDAP_w https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/AdminManagem

NEW QUESTION 6
Which two prerequisites are required to configure a SAN boot from the FCoE storage of a Cisco UCS system? (Choose two.)

• A. The Cisco UCS domain must be able to communicate with the SAN storage device that hosts the operating system image.
• B. A boot policy must he created that contains a local disk, and the LVM must be configured correctly.
• C. There must be IVR-enabled FCoEproxying between the Cisco UCS domain and the SAN storage device that hosts the operating system image.
• D. There must be a boot target LUN on the device where the operating system image is located.
• E. There must be a boot target RAID on the device where the operating system image is located.

Answer: CD

NEW QUESTION 7
Which two elements are defined in a dynamic vNIC connection policy? (Choose two.)

• A. adapter policy
• B. QoS policy
• C. network control policy
• D. number of dynamic vNICs
• E. jumbo frame size

Answer: AD

NEW QUESTION 8
The system-reserved VLANs within Cisco UCS are 3968 to 4048 by default. Where can a user change the starting value of this range?

• A. VLAN manager
• B. global policies
• C. LAN cloud
• D. cannot be changed

Answer: D

NEW QUESTION 9
Refer to the exhibits.

The blade server has two HBAs. How many WWPN targets on VSAN 2001 are accessible to the blade server?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 10
View the Exhibit.

Refer to the exhibit. Which type of FCoE topology is displayed?

• A. direct-attach
• B. remote-attach
• C. vPC
• D. FCoE with Cisco 2232 Fabric Extenders

Answer: B

Explanation: Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white_paper_c11-56040

NEW QUESTION 11
Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server?

• A. The ports on an installed Cisco network adapter card
• B. The two 1-Gb Ethernet ports
• C. The two 10/100 management ports
• D. The two 10/100 management ports, but each port has a default setting

Answer: B

NEW QUESTION 12
Which statement about the use of RBAC roles in a Cisco UCS system is true?

• A. RBAC roles define which features are enabled on a Cisco UCS system
• B. RBAC roles create groups of organizations
• C. RBAC roles create groups of local users
• D. RBAC roles define which features users can access.

Answer: D

NEW QUESTION 13

Answer:

Explanation:

NEW QUESTION 14

Answer:

Explanation:

NEW QUESTION 15

Answer:

Explanation:

NEW QUESTION 16

Answer:

Explanation:

NEW QUESTION 17
Before upgrading a Cisco UCS cluster.you need to verify the high-availability statue and roles of the cluster. In which scenario can you successfully perform the upgrade'?

• A. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is O
• B. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both ON and the cluster state is HA WAITING.
• C. When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value isU
• D. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
• E. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is Activ
• F. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both READY and the cluster state is HA WAITING.
• G. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is U
• H. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA UP.

Answer: D

Explanation: When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value is Up.
When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/ b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_011.pdf
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/FirmwareMgmt/3

NEW QUESTION 18
When implementing a Cisco UCS C-series standalone server, which of the following Cisco Integrated Management Controller NIC modes allow use of the least number of physical ports while providing maximum levels of redundancy?

• A. dedicated
• B. shared LOM
• C. shared LOM 10G
• D. Cisco VIC

Answer: D

NEW QUESTION 19
You are configuring HTTPS access to Cisco UCS Manager. You create a key ring, you issue a certificate request for the key ring, and you create the certificate request for the key ring. You discover that you still receive untrusted connection messages when connecting to Cisco UCS Manager from a Firefox browser and a Google Chrome browser.
What should you do to resolve the issue?

• A. Create a trusted point.
• B. Obtain a validated certificate from Cisco.
• C. Use only the Microsoft Internet Explorer browser.
• D. Sign the certificate by using Cisco UCS Manager.

Answer: D

Explanation: Reference:
https://www.derekseaman.com/2012/04/install-trusted-ssl-certificate-in.html