NEW QUESTION 1

Answer:

Explanation: The fabric interconnect b changes from subordinate to primary

NEW QUESTION 2
Which adapter is capable of supporting VM-FEX?

• A. VIC 1280
• B. Cisco UCS M61KR-I
• C. Cisco UCS M72KR
• D. Cisco UCS M51KR-B

Answer: A

Explanation: Topic 3, Exam Set 2

NEW QUESTION 3
Refer to the exhibit.

From the Cisco Integrated Management Controller GUI, the Cisco Network Assistant VIC adapter properties of a Cisco UCS -Series Server in standalone mode are configured as shown. Which three options are results of the configuration? (Choose three.)

• A. Sixteen dynamic vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• B. A description for the Cisco Network Assistant VIC adapter is assigned.
• C. Sixteen static vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• D. FIP support on the Cisco Network Assistant VIC adapter is enabled.
• E. Sixteen dynamic device aliases for vNICs on the Cisco Network Assistant VIC adapter are provisioned.
• F. NIV mode for the Cisco Network Assistant VIC adapter is disabled.

Answer: ABD

Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-seriesswitches/117690-configure-vmfex-00.ht

NEW QUESTION 4
Which option is a prerequisite when implementing iSCSI boot?

• A. The OS must be iBFT compatible.
• B. The boot parameters must be configured in the Global boot policy.
• C. There are no licensing requirements for the storage array.
• D. Each iSCSI initiator must be on the same IP subnet.

Answer: A

NEW QUESTION 5
Which three parameters can be configured for a vHBA? (Choose three.)

• A. Enable persistent binding.
• B. Enable a hardware-based failover.
• C. Define a SAN pin group
• D. Assign a QoS policy.
• E. Define an MTU.
• F. Assign a MAC address.

Answer: ACD

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/21/b_UCSM_GUI_Configura

NEW QUESTION 6
Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

• A. Ethernet uplink ports connected to upstream switch
• B. console port connected to a computer terminal or console server.
• C. Layer 1 ports on both fabric interconnects connected to each other
• D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
• E. Layer 2 ports on both fabric interconnects connected to each other
• F. Fibre Channel uplink ports connected to upstream fabric switch
• G. management Ethernet port (mgmt0) connected to external switch or router
• H. port channel to each fabric interconnect

Answer: BCEG

NEW QUESTION 7
An administrator is testing the Cisco Nexus 1000v switch on top of a Cisco UCS Blade. They realize that the test VM traffic is not marked correctly after it leaves the Cisco UCS B-series blade. What is the reason for seeing this behavior?

• A. The Cisco UCS does not support QoS marking
• B. The Cisco UCS QoS policy applied to the blade has the host control set to "none."
• C. The Cisco Nexus 1000V Series Switches do not support QoS marking.
• D. The Cisco Nexus 1000V Series Switch QoS marking has not been enabled with "feature gos."

Answer: B

NEW QUESTION 8
Which statement about Adapter FEX is true?

• A. Adapter FEX extends the fabric into the server.
• B. Adapter FEX extends the fabric into the hypervisor.
• C. Adapter FEX extends the fabric down to the FEX port.
• D. Adapter FEX extends the fabric down to the VM.

Answer: A

NEW QUESTION 9
Which two of the following are prerequisites when configuring a server to use SAN boot? (Choose two.)

• A. A virtual media device must be accessible from the server
• B. The global boot policy must be attached to a service profile template.
• C. The local disk must be the primary disk in the boot order.
• D. A boot LUN must contain an installation of an operating system
• E. The Cisco UCS domain and the SAN storage device must be able to communicate

Answer: DE

NEW QUESTION 10
Which technology makes VM-FEX possible?

• A. VXLAN
• B. VNTAG
• C. VPC
• D. DVS

Answer: B

NEW QUESTION 11
You need to implement a Cisco UCS system at a customer Site.
Which adapters and operating systems have preprovisioned adapter policies?

• A. Ethernet vNICs and Windows, OS X Serve
• B. and Oracle Solaris operating systems.
• C. Fibre Channel vNICs and Windows, FreeBSD, and Linux Operating systems.
• D. Ethernet vNICs and Windows, VMware, and Linux operating systems.
• E. Fibre Channel vNICs and Windows, Oracle Solaris, and Linux operating systems.

Answer: D

Explanation: Reference:
http://www.educationalcentre.co.uk/deploy-a-cisco-ucs-system-part-2-from-scratch-for-vmware-esxi/
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configu

NEW QUESTION 12
Open the windows by clicking on the minimized title at the bottom of the viewing area. Windows can be minimized by clicking on the [-], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Click the icon to open a device terminal to interact with the hardware.
Open the Questions window and begin with clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Fabric Interconnect Failover to answer the questions associated with the UCS cluster.
Exhibit.

The cluster lead b command represents:

• A. The cluster will go into a subordinate state.
• B. The cluster will switch fabric interconnect b from subordinate to lead or primary.
• C. The cluster will only use fabric interconnect to.
• D. The cluster will load balance traffic over Fabric Interconnects a and b.

Answer: B

NEW QUESTION 13
Which two statements describe effects of enabling a Cisco UCS Fabric Interconnect in Ethernet end-host mode? (Choose two.)

• A. MAC address learning is disabled on the uplink ports of the fabric interconnect.
• B. MAC address learning is enabled on the server ports of the fabric interconnect.
• C. Server-to-server communication on the same VLAN is not performed locally via fabric interconnect, but requires an external switch.
• D. By default, unicast traffic received by the fabric uplink port to unknown destination MAC addresses is forwarded to all of the server ports.
• E. MAC address learning is disabled on all of the ports in Ethernet end-host mode.

Answer: AB

Explanation: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_c11 MAC address learning occurs only on the server ports; MAC address movement is fully supported.
Server-to-server Layer 2 traffic is locally switched. In end-host mode, unknown unicast broadcasts are not flooded, switch mode is required. Additionally, because there is no MAC address learning on the uplink ports, the MAC address table can scale to support as many virtual machines as the number of entries available in the MAC address forwarding table.

NEW QUESTION 14
You are configuring a Cisco UCS port channel. Drag and drop the description from the left onto the correct port channel types on the right.

Answer:

Explanation:

NEW QUESTION 15
Refer to the exhibit.

Which result of implementing the maintenance policy is true?

• A. The FSM applies the waiting changes when the host OS resets.
• B. The Cisco UCS server reboots as soon as the change is made to the service profile.
• C. The Cisco UCS server reboots at a scheduled time.
• D. The Cisco UCS server reboots 300 seconds after the policy is applied.

Answer: A

NEW QUESTION 16
To boot from SAN, you must perform which two configurations on a Cisco UCS system? (Choose two.)

• A. Enter the boot LUN and the nWWNs.
• B. Put the boot VSANin a dedicated boot service profile template.
• C. Create a LUN, and allow the server WWPN to have access to the LUN.
• D. Put the server WWPN and the storage array WWPN in the same zone.
• E. Create a dedicated boot VSAN.

Answer: CD

Explanation: Reference:
http://jeffsaidso.com/2010/11/boot-from-san-101-with-cisco-ucs

NEW QUESTION 17
Refer to the Exhibit:

You are integrating Cisco UCS Director with the ACI fabric. Where do you create the account type?

• A. Pods
• B. Managed Network Elements
• C. Multi-Domain Managers
• D. Bare Metal Agents

Answer: C

NEW QUESTION 18
Which three items represent message formats that are available to send fault data using Cisco Call Home? (Choose three.)

• A. short text
• B. long text
• C. HTML
• D. SOAP API
• E. XML
• F. Java

Answer: ABE

NEW QUESTION 19
When adding a VMware ESXi host to the Distributed Virtual Switch, what are two risks of migrating a VMNIC that is associated to vSwitch 0? (Choose two.)

• A. loss of access to the management IP interface
• B. duplicate IP address error
• C. duplicate MAC address error
• D. loss of VMware ESXi communication with VMware vCenter
• E. DVS port group will not appear in the VM network settings
• F. DVS port group will overwrite the port groups in vSwitch 0

Answer: AD