NEW QUESTION 1
Which two VMware features will not allow an adapter to transition from Cisco VM-FEX standard mode to universal passthrough mode? (Choose two.)

• A. VM Snapshot
• B. Volume Shadow Copy
• C. Storage vMotion
• D. HA
• E. Resource Reservations

Answer: AC

NEW QUESTION 2
After an admin configures a service profile template and associates it to the blade, the admin notices that changes to the template are not automatically pushed to profiles that are inheriting that template. The service profile template and vNIC templates are set to "initial".
Which two actions resolve this issue? (Choose two.)

• A. Delete the vNIC template and re-create it as an uploading template.
• B. Delete the type of the vNIC template from “initial” to “updating”
• C. Delete the service profile template and re-create it as an updating template
• D. Delete and recreate all templates
• E. Change the type f the service profile template from “initial” to “updating”

Answer: AC

NEW QUESTION 3
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager. Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.



Refer to the Exhibit 3 screenshot of UCS Manager. Which two items are required to configure an IPMI profile? (Choose two.)

• A. IPMI Type
• B. User
• C. Role
• D. Locale
• E. Administrative State

Answer: BC

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 4
Which two options are valid modes for VM-FEX in a Cisco UCS Manager port profile? (Choose two.)

• A. transparent
• B. bypass
• C. standard
• D. advanced
• E. high-performance
• F. low-pass

Answer: CE

NEW QUESTION 5
Refer to the exhibit.

Which port is used for communication between the server and the Cisco Integrated management Controller?

• A. port on the adapter card
• B. management Ethernet port
• C. LAN on the motherboard port
• D. fabric uplink port

Answer: B

Explanation: Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-2-1/b_Cisco_UCS_C-Se

NEW QUESTION 6
You have a Cisco FabricPath network. You must implement vPC+ for a downstream switch. Which three actions should you perform? (Choose three.)

• A. Configure the switch ID on the peer switches.
• B. Establish a peer link between the peer switches.
• C. Configure the downstream switch to use PAgP on EtherChannel.
• D. Connect the downstream switch to a 10-Gb port.
• E. Configure the upstream switch to use PAgP on EtherChannel.
• F. Configure a peer keepalive between the peer switches.

Answer: ABC

NEW QUESTION 7
Which two statements describe the full state type of backup? (Choose two.)

• A. It is a binary file.
• B. It cannot be used to restore the system during disaster recovery.
• C. It can use this file for an import.
• D. It can be used only on a system that is running the same version as the system from which the backup file was exported.
• E. It is an XML file.

Answer: AD

NEW QUESTION 8
Open the windows by clicking on the minimized title at the bottom of the viewing area. Windows can be minimized by clicking on the [-], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Click the icon to open a device terminal to interact with the hardware.
Open the Questions window and begin with clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Fabric Interconnect Failover to answer the questions associated with the UCS cluster.
Exhibit.

Which statements is true regarding the Fabric Interconnect Failover configuration changes?

• A. High availability is being setup so that cluster a and b can both be subordinate or primary.
• B. The fabric interconnect b changes from subordinate to primary.
• C. High availability is setup so that fabric interconnect will keep a to be primary and b will be lead.
• D. The Fabric interconnect can have lead states, so that b will switch to primary and a will stay primary.

Answer: B

NEW QUESTION 9
Which two statements about Cisco VM-FEX dynamic vNIC configuration and provisioning by using the Cisco UCS Manager are true? (Choose two.)

• A. Dynamic vNIC parameters are configured by using SNMP.
• B. Dynamic vNIC parameters must be configured manually before the virtual machine connects to its port group.
• C. Dynamic vNIC parameters are configured dynamically after the assigned virtual machine connects to the port group.
• D. Dynamic vNIC parameters are enabled by using the Fibre Channel Forwarder protocol.
• E. Dynamic vNIC parameters are configured by inheriting the port-group parameters of the associated virtual machines.

Answer: CD

Explanation: Reference: http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_ops_vmfex.pdf

NEW QUESTION 10
An administrator is required to configure a policy in Cisco UCS to schedule backups. Which two backup types can be scheduled? (Choose two.)

• A. full state
• B. import configuration
• C. logical configuration
• D. system configuration
• E. all configuration

Answer: AE

Explanation: You can configure policies in Cisco UCS to schedule the following types of backups: Full state
All configuration
You cannot schedule any other type of backup. Full State Backup Policy
All Configuration Export Policy Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/b_UCSM_GUI_Configu

NEW QUESTION 11
Which Cisco solution addresses the challenge of managing multiple large-scale Cisco UCS domains by providing streamlined management of up to 10.000 servers across hundreds of sites?

• A. Cisco UCS Central
• B. Cisco UCS Director
• C. Cisco UCS Domain Manager
• D. Cisco UCS Manager

Answer: A

Explanation: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-central-software/data_sheet_c

NEW QUESTION 12
Which option describes the difference between "high-performance" and "none" on a VM-FEX port profile?

• A. None is software assisted, and high-performance is software and hardware assisted.
• B. None indicates that VM-FEX is not used on this interface, and high-performance indicates that is used.
• C. None is used for management profiles, and high-performance is used for mission-critical data profiles.
• D. None assumes default scheduling settings for the port profile, and high-performance gives the ports priority in scheduling.

Answer: A

NEW QUESTION 13
Which two are true concerning authorization within a Cisco Unified Computing System? (Choose two.)

• A. A role defines a collection of privileges that determines which actions a user can take in Cisco Unified Computing System Manager.
• B. Authorization consists of three components (roles, password policy, and locales) that are based on which features and resources the user will not have access to.
• C. Customized roles can be configured on and downloaded from remote AAA servers.
• D. The logical resources, pools and policies, are grouped into roles.
• E. If the service profile cannot find available resources, it will search in the parent organization for pools and resources.

Answer: AE

NEW QUESTION 14
Which item represents a secure method of transmitting fault data with Cisco Call Home?

• A. Cisco Transport Gateway
• B. RSADigital Certificate
• C. IPsec
• D. secure XML

Answer: A

NEW QUESTION 15
You need to enable Cisco UCS Manager to support out-of-band IPv4 address access to the Cisco UCS KVM Direct launch page from a web browser.
What should you enable?

• A. SMASH CLP
• B. CIM XML
• C. SNMP
• D. CIMC Web Service

Answer: D

Explanation: -Cisco UCS Manager supports out-of-band IPv4 address access to the Cisco UCS KVM Direct launch page from a web browser. To provide this access, you must enable the following service: CIMC Web Service
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/3-0/b_UCSM_GUI_User_G

NEW QUESTION 16
You attempt to perform an ESXi update on a Cisco UCS C250 server, but the update does not recognize the NICs. You must perform the update as quickly as possible. Which step must you do first?

• A. Check the UCS compatibility matrix and replace the NIC with a supported one.
• B. Reconfigure the NIC ID on the LOM.
• C. Update the LOM firmware by using the Cisco Host Update Utility.
• D. Update the NIC firmware by using the Cisco Host Update Utility.

Answer: C

Explanation: https://supportforums.cisco.com/t5/unified-computing-system/ucs240m3-network-interfaces-missing-on-esxi-5-
http://terenceluk.blogspot.com/2011/08/updating-firmware-for-cisco-ucs-c.html

NEW QUESTION 17
You configure FCoE in a Cisco UCS system at a customer site. The configuration seems correct, but the customer complains that the system fails to perform as expected. FCoE VLAN discovery, FCF discovery and FLOGI processes work properly. The issue appears to be with the Fibre Channel commands and responses.
What is a possible cause of the issue?

• A. The storage device is experiencing configuration or compatibility issues when the FIP process completes successfully.
• B. The routed Layer 3 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.
• C. The FCoE configuration is experiencing errors because of issues with the Fibre Channel commends.
• D. The switched Layer 2 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.

Answer: B

Explanation: Make sure that your native vlan is carried across all the trunk ports.
Reference:
https://supportforums.cisco.com/t5/storage-networking/fip-and-native-vlan/td-p/2451783

NEW QUESTION 18
Refer to the exhibit.

You bind the service profile to the updating template. You plan to update the template. Which impact on the service profile when you update the template is true?

• A. Changes to the service profile are locked after the profile is created.
• B. The update to the service profile fails.
• C. The service profile must be updated manually.
• D. The service profile is updated automatically.

Answer: A

NEW QUESTION 19
Refer to the exhibit below.

Which tab do you select to add an APIC account when adding an ACI fabric?

• A. Multi-Domain Managers
• B. Physical Accounts
• C. Managed Network Elements
• D. Bare Metal Agents

Answer: A

Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/apic-management-guide/5-4/b_UCS Step 1 On the menu bar, choose Administration > Physical Accounts.
Step 2 Click the Multi-Domain Managers tab. Step 3 Click Add.
Step 4 In the Add Account dialog box, choose APIC from the Account Type drop-down list. Step 5 Click Submit.